Download Print this page

Pioneer DEH-2950MP Operation Manual: Storing The Strongest Broadcast Frequencies; Built-in Player; Playing A Disc; Repeating Play

Cd receiver.
Hide thumbs

Advertisement

Section
Operating this unit
02
3
Press c or d to set the sensitivity.
FM: LOCAL 1—LOCAL 2—LOCAL 3—
LOCAL 4
AM: LOCAL 1—LOCAL 2
The LOCAL 4 setting allows reception of only
the strongest stations, while lower settings let
you receive progressively weaker stations.
Storing the strongest broadcast
frequencies
BSM (best stations memory) lets you automa-
tically store the six strongest broadcast fre-
quencies under preset tuning buttons 1 to 6.
Once stored you can tune in to those frequen-
cies with the touch of button.
! Storing broadcast frequencies with BSM
may replace broadcast frequencies you
have saved using buttons 1 to 6.
1
Press FUNCTION to select BSM.
2
Press a to turn BSM on.
Six strongest broadcast frequencies will be
stored in the order of their signal strength.
# To cancel the storage process, press b.

Built-in Player

Playing a disc

1
Insert a CD (CD-ROM) into the disc load-
ing slot.
Playback will automatically start.
# Be sure to turn up the label side of a disc.
# After a CD (CD-ROM) has been inserted, press
SOURCE to select the built-in CD player.
# You can eject a CD (CD-ROM) by pressing
EJECT.
2
Press a or b to select a folder when
playing a WMA/MP3/WAV disc.
# You cannot select a folder that does not have
a WMA/MP3/WAV file recorded in it.
# To return to folder 01 (ROOT), press and hold
BAND. However, if folder 01 (ROOT) contains no
files, playback commences with folder 02.
8
En
Black plate (8,1)
3
To perform fast forward or reverse,
press and hold c or d.
# If you select ROUGH, pressing and holding c
or d enables you to search every 10 tracks in the
current disc (folder). (Refer to Searching every 10
tracks in the current disc or folder on the next
page.)
4
To skip back or forward to another
track, press c or d.
Notes
! Read the precautions with discs and player on
page 13.
! If an error message such as ERROR-11 is dis-
played, refer to Error messages on page 13.
! There is sometimes a delay between starting
up disc playback and the sound being issued.
When being read, FRMTREAD is displayed.
! When playing CD-EXTRA or MIXED-MODE
CDs, WMA/MP3/WAV and CD-DA can be
swithced by pressing BAND.
! If you have switched between WMA/MP3/
WAV files and audio CD-DA, playback starts at
the first track on the disc.
! The built-in CD player can play back a WMA/
MP3/WAV file recorded on CD-ROM. (Refer to
page 14 for files that can be played back.)
! When playing back VBR (variable bit rate) re-
corded files, erapsed play time may not be dis-
played correctly.
! When playing WMA/MP3/WAV disc, there is
no sound on fast forward or reverse.

Repeating play

Repeat play plays the same track/folder within
the selected repeat play range.
1
Press FUNCTION to select RPT.
2
Press c or d to select the repeat range.
DSC – Repeat all tracks
TRK – Repeat just the current track
FLD – Repeat the current folder
# If you select another folder during repeat play,
the repeat play range changes to disc repeat.
<CRD4138-A/N>8

Advertisement

Chapters

   Also See for Pioneer DEH-2950MP

   Related Manuals for Pioneer DEH-2950MP

Comments to this Manuals

Symbols: 0
Latest comments: