Basic functions
Switching to standby/on and
selecting functions
1
When the set is on, press STANDBY-ON/
ECO POWER to switch it to standby (or y
on the remote control)
➜
Display shows GoodBye. Then,
➜
Station:
The PHILIPS screen dims out
2
To switch on, press STANDBY-ON/ ECO
POWER on the set
➜
The set switches to the last source selected.
OR
On the remote control, press the source button
(e.g. TUNER/AUX, Center).
3
To select your function, press SOURCE once
or more on the set (or Center, TUNER/AUX
on the remote control)
Switching to Eco power/ on
In the power-saving Eco power mode, the set's
display and Wi-Fi connection are turned off.
1
When the set is on, press and hold STANDBY-
ON/ ECO POWER to switch it to Eco
power (or y on the remote control).
➜
The display is switched off.
2
To switch on, press and hold STANDBY -ON/
ECO POWER (or y on the remote control)
or press and hold SOURCE on the set
➜
The set switches to the last source selected.
Helpful hints:
– In the standby/Eco power mode, the settings of
networking, sound, display and language, the tuner
presets, and the volume level (maximum: the
moderate level) will be retained in the set's
memory.
22
Auto-standby
●
When the set has reached the end of playback/
recording and remains in the stop position for
more than 5 minutes, the set will switch to
standby automatically to save power.
Volume control
1
Check the playback starts.
2
Adjust the volume with VOL +/- buttons.
➜
Display shows the volume bar, indicating the
volume level.
MUTE
During playback, you can temporarily switch off
the sound without switching off the set.
1
Press MUTE to switch off the sound.
➜
The icon
appears. Playback continues
without sound.
2
To switch on the sound, press MUTE again or
adjust the volume with VOL +/-
– You can also switch on the sound by activating
MUSIC BROADCAST on the Center
➜
The icon
disappears