Patton electronics 1089/I User Manual page 3

1.3 SERVICE
All warranty and non-warranty repairs must be returned freight
prepaid and insured to Patton Electronics. All returns must have a
Return Materials Authorization number on the outside of the shipping
container. This number may be obtained from Patton Electronics
Technical Service at:
tel: (301)975-1007
email: support@patton.com
www: http://www.patton.com
NOTE:
Packages received without an RMA number will not be
accepted.
Patton Electronics' technical staff is also available to answer any
questions that might arise concerning the installation or use of your
Model 1089. Technical Service hours: 8AM to 5PM EST, Monday
through Friday.
3
2 2 . . 0 0 G G E E N N E E R R A A L L I I N N F F O O R R M M A A T T I I O O N N
Thank you for your purchase of this Patton Electronics product.
This product has been thoroughly inspected and tested and is warrant-
ed for One Year parts and labor. If any questions or problems arise
during installation or use of this product, please do not hesitate to con-
tact Patton Electronics Technical Support at (301) 975-1007.
2.1 FEATURES
• Provides MAC Level (Layer 2) connection between 2 peered
10BaseT Ethernet LANs
• Operates transparently to higher level protocols such as TCP/IP,
DECnet, NETBEUI and IPX
• PPP (Point to Point Protocol, RFC 1661) with Bridge Control
Protocol (RFC 1638)
• Automatically discovers, loads and deletes MAC addresses
• Point-to-Point Connectivity over 2-Wire HDSL up to 5km
• HTTP/SNMP Manageable as CP (Customer Premises) Unit with
1094ARC CO (Central Office) Rack Card
• Internal or receive recovered clocking between units
• LED indicators for 10BaseT Link, DSL Link, Status, No Signal,
Error and Test Mode
2.2 DESCRIPTION
The NetLink TM 10BaseT HDSL Rocket (Model 1089) is a Multi-
Rate DSL Modem that provides seamless MAC Layer connectivity
between 2 peered 10BaseT LANs. Now, Enterprise users no longer
need to hassle with a bridge and a CSU/DSU or recurring leased line
costs. The NetLink Rocket allows users to add additional nodes to a
LAN that has reached its maximum distance limits or separate high
traffic areas of a LAN. The Rocket connects peered LANs and auto-
matically forwards and receives LAN broadcasts, multi-casts and
frames across a 2-Wire DSL span. The 1089/I is 802.3 compliant and
supports PPP (RFC 1661) and BCP (RFC 1638).
The NetLink TM HDSL 10BaseT Rocket features include loopback
diagnostics, inband SNMP/HTTP remote management capabilities
using NetLink Plug-and-Play and externally accessible configuration
switches. As a symmetric DSL modem, the NetLink
offers the same data rates in both directions over a single pair of regu-
lar telephone lines using 2B1Q modulation. The Rocket connects to
the DSL line via an RJ-45 jack. Standard power options include
115VAC, 230VAC, Universal (100/240VAC) and any DC input between
36-60VDC.
4
TM HDSL Rocket