Download Print this page

Patton electronics 1000R User Manual page 5

Async. short range modem for modular eia/tia-561 systems

Advertisement

APPENDIX A
PATTON MODEL 1000R SPECIFICATIONS
Transmission Format: Asynchronous
Data Rate:
0 to 19,200 bps
Distance:
See table below
Surge Protection:
Compliant with IEC 801.5 level 2, 1kV
(Model 1000RS only)
Control Signal:
DCD (pin 2) and DSR (pin 1) turn on when
modem is powered up (connected); CTS
(pin 7) turns on immediately after the
terminal raises RTS (pin 8)
Transmit Line:
4-wire, unconditioned line
Transmit Mode:
Full duplex, 4-wire
Transmit Level:
0 dBm
Line Connection:
RJ-11, RJ-45
Power Supply:
No external power required, uses ultra low
power from data and control signals
Temperature:
32° to 140°F
Humidity:
95% non-condensing
Size:
2.0" x 1.7" x 0.8" (5.1 x 4.3 x 2.0 cm)
7
APPENDIX B
PATTON MODEL 1000R CABLE RECOMMENDATIONS
The Patton Model 1000R operates at frequencies of 20kHz or less
and has been performance tested by Patton technicians using twisted-
pair cable with the following characteristics:
Wire Gauge
Capacitance
19 AWG/.9mm
83nf/mi or 15.72 pf/ft.
22 AWG/.6mm
83nf/mi or 15.72 pf/ft.
24 AWG/.5mm
83nf/mi or 15.72 pf/ft.
To gain optimum performance from the Model 1002, please keep
the following guidelines in mind:
• Always use twisted pair wire—this is not an option.
• Use twisted pair wire with a capacitance of 20pf/ft or less.
• Avoid twisted pair wire thinner than 26 AWG (i.e. avoid higher
AWG numbers than 26)
• Use of twisted pair with a resistance greater than the above
specifications may cause a reduction in maximum distance
obtainable. Functionality should not be affected.
• Environmental factors too numerous to mention can affect the
maximum distances obtainable at a particular site. Use "maximum
distance" figures as a general guideline only.
Model 1000 Distance Table in Miles (km)
Data Rate
(bps)
19 AWG
( 0.9 mm)
19,200
6.2(9.9)
9,600
7.5(12.0)
4,800
8.7(13.9)
2,400
11.8(18.9)
1,200
17.0(27.2) 11.8(18.9) 8.0(12.8)
8
Resistance
.0163 Ohms/ft.
.0326 Ohms/ft.
.05165 Ohms/ft.
Wire Gauge
24 AWG
26 AWG
(0.5 mm)
(0.4 mm)
3.7(5.9)
1.2(1.9)
4.9(7.8)
2.5(4.0)
5.6(9.0)
3.7(5.9)
8.0(12.8) 4.9(7.8)

Advertisement

loading

This manual is also suitable for:

1000rs