Download Print this page

Resetting The Icm Tape For Future Messages; Room Sound - Panasonic EASA-PHONE KX-T1450 Operating Instructions Manual

Auto-logic automatic telephone answering system
Hide thumbs

Advertisement

RESETTING
THE ICM TAPE FOR FUTURE MESSAGES
To record new Incoming
Messages
from the beginning
of the tape, after the recorded
messages
are played
back or while they are being played;
1 Push "3".
l
The unit will rewind the tape to the
beginning
and a beep tone will be
II
heard when the tape has been reset.
(
If you have used Memory
Playback
After
all the messages
have
been
played
back.
Push "3".
l
The unit will rewind the tape to the beginning
of
the
newly-recorded
messages
and a beep will be heard.
Push "3"
again.
l
A beep tone will be heard and the
future messages
will be recorded
from the beginning
of the ICM tape.
Plavback
.
After
you have
used
the
Memory Playback.
if you have reset the tape by mistake
1 Push "2" after the tape has been reset (one-beep),
then hang up.
l
The unit will advance
the tape to the end of the recorded
messages.
MONiTORlNG
ROOM SOUND
You can screen any sound in the room where the unit is installed
for 30 seconds.
2
Call your unit and push
the Code
No. during
the OGM.
Push "5"
right after you hear the beep tones indicating
the
number
of the recorded
messages.
@You can listen for 30 seconds.
l
To listen further, push "5" again within 10 seconds
of hearing
one beep.
-17-

Advertisement

loading

  Related Manuals for Panasonic EASA-PHONE KX-T1450

This manual is also suitable for:

Easa-phone kx-t1451