Transmission With Destination Monitoring; Start Key - Panasonic DP-C266 Operating Instructions Manual

Transmission with Destination Monitoring

Select "Monitor" on the Touch Panel Display to obtain a dial tone. This feature is called "On-hook dialing".
To monitor the status of a remote station, follow the steps below.
This function is not available when the Function Parameter "137 Re-enter Direct Dial" (Fax/Email Settings >
Fax Parameters) is set to "Valid".
1
Place original(s).
If the Platen Glass is used, only one page
can be transmitted at a time.
Refer to Placing Originals (see page 14).
2
Press the Fax key.
3
Select "Monitor".
The Monitor screen appears, and you will hear
a dialing tone through the monitor speaker.
4
Enter the fax number of the
destination.
When the Function Parameter "136 Restrict
Direct Dial" is set to "Valid", manual input of
fax numbers is not available. Select a
destination from the "Address Book".
32
5
When you hear a beep, press the

Start key.

For instructions on how to cancel a
transmission, refer to Canceling a
Communication (see page 56).
Press the Reset key to return the machine
to the initial screen of the currently active
mode.
Raises the monitor volume.
Lowers the monitor volume.
Select once to recall the
last dialed fax number.
Select twice to insert a
pause (dialing interval).