Panasonic DP-C266 Operating Instructions Manual page 219

Info. Code Problem
726 Received an error response
from the DNS server.
727 Communication error occurred
while communicating with
remote station.
728 Communication error occurred
with the SMTP Direct
transmission.
729 Failed to authenticate (SMTP
Authentication) when connecting
with the SMTP server.
730 Cannot retrieve the Journal or
program the Internet Parameters
and the Auto Dialer remotely via
Email from a PC.
731 The dialer buffer for manual
dialing was full (70 stations)
when the Relay transmission
request was received.
734 Internet Fax communications
and POP reception functions are
disabled.
800/814/816/ Unit was requested to relay a
825 document or Confidential
Communication but has no
capability.
815 Mailbox is full.
826 The received sub-address is not
pre-programmed in the Address
Book.
850 The Relay transmission was
canceled at a relay station
because the Relay XMT
passwords did not match.
870 Memory overflow occurred while
storing documents into memory
for transmission.
Action
Check the POP server name.
Check the SMTP server name.
Check the remote station.
Check the remote station.
Check the SMTP authentication user name
and password.
Contact the network administrator.
Check that the Fax Parameter "158 PC
Remote Update" is set to "Valid".
Request the originator to re-send the Relay
transmission request after the reserved
communication is finished.
Contact the device administrator.
Check with the other party.
Delete confidential documents.
Check entries in the Address Book.
Check the entry of the sub-address of the
remote station.
Check the password.
Transmit documents without storing into
memory.
Add SD Memory Card in the machine.
Refer to
Operating
Instructions (For
Administrator
Setup)
Operating
Instructions (For
Function
Parameters)
Operating
Instructions (For
Function
Parameters)
Deleting a
Confidential
Document (See
page 74)
Address Book
(See page 176)
Operating
Instructions (For
Function
Parameters)
Direct
Transmission
(See page 48)
219