Optional Programming; System Additional Information; Default - Panasonic KX-TA1232 Programming Tables

Optional Programming

[990] System Additional Information

< Selection >
Area – Bit
01 – 1 : 0 (ringback tone) / 1 (Music on Hold)
: 0 (Consultation Hold) / 1 (disconnection)
01 – 2
01 – 3 : 0 (disconnection signal) /
1 (External Feature Access)
: Unused
01 – 4-7
: 0 (disable) / 1 (enable)
01 – 8
01 – 9 : 0 (Consultation Hold) / 1 (disconnection)
: 0 (80 ms) / 1 (160 ms)
01 – 10
: 00 (0.5 s) / 01 (1.0 s) / 10 (1.5 s) / 11 (2.0 s)
01 – 12,11
01 – 14,13 : 00 (0.5 s) / 01 (1.0 s) / 10 (1.5 s) / 11 (2.0 s) 05 – 13
01 – 15 : 0 (system) / 1 (VPS)
: Unused
01 – 16
: 0 (initiating extension) / 1 (Operator 1)
02 – 1
02 – 2 : 0 (both calls) / 1 (outgoing calls only)
: 0 (disable) / 1 (enable)
02 – 3
: 0 (no check) / 1 (check)
02 – 4
02 – 5 : Unused
: 0 (disable) / 1 (enable)
02 – 6
: 0 (60 %) / 1 (67 %)
02 – 7
02 – 8 : 0 (extension number) / 1 (free)
: Unused
02 – 9
02 – 10 : 0 (internal music source) /
1 (external music source)
02 – 12,11 : 00 (630 ms) / 01 (830 ms) / 10 (1030 ms)
: 0 (normal) / 1 (distinctive)
02 – 13
: 0 (84 ms–1000 ms) / 1 (200 ms–1000 ms)
02 – 14
02 – 16,15 : Unused
03 – 1-12 : 0 (0 dB) / 1 (- 3dB)
: Unused
03 – 13-16
: Unused
04 – 1-8
04 – 9 : 0 (prevent) / 1 (allow)
: 0 (prevent) / 1 (allow)
04 – 10
: Unused
04 – 12,11
04 – 13 : 0 (disable) / 1 (enable)
: Unused
04 – 14-16
: 0 (enable) / 1 (disable)
05 – 1
05 – 2 : 0 (10 times) / 1 (no limitation)
05 – 3 : 0 (disable) / 1 (enable)
: Unused
05 – 4
Area 01
Bit

Default

Selection
88
16 15 14 13 12 11
0 0 1 0 1
Area – Bit
05 – 5 : 0 (immediately) / 1 (after 5 seconds)
: 0 (disable) / 1 (enable)
05 – 6
: 0 (enable) / 1 (disable)
05 – 7
05 – 8 : 0 (3 s) / 1 (5 s)
: 0 (disable) / 1 (enable)
05 – 9
: 0 (Terminate) / 1 (Flash)
05 – 10
05 – 11 : 0 (3 times by 40 ms) / 1 (2 times by 280 ms)
: 0 (<Incoming> + caller no.) /
05 – 12
1 (<I> + caller no. + name)
: 0 (enable) / 1 (disable)
05 – 14 : 0 (IRNA) / 1 (reorder tone is sent)
05 – 15 : 0 (Operators 1 and 2 simultaneously) /
1 (Operator 1 first and then Operator 2)
05 – 16 : 0 (enable) / 1 (disable)
: 0 (not printed out) / 1 (printed out)
06 – 1
: Unused
06 – 2-4
06 – 5 : 0 (first entered code) / 1 (last entered code)
: 0 (receive) / 1 (not receive)
06 – 6
: 0 (receive) / 1 (not receive)
06 – 7
06 – 8 : 0 (disable) / 1 (enable)
: Unused
06 – 9-16
: Unused
07 – 1-6
07 – 7 : 0 (beep) / 1 (usual music source)
07 – 9,8 : 01 (IRNA) /
10/11 (receive at the CO button) /
00 (busy tone is sent)
07 – 10-16 : Unused
08 – 1-16 : Unused
: Unused
09 – 2,1
: 11 (Red Flashing / Red On) /
09 – 4,3
10 (Red On / Red On) /
01 (Red On / Red Flashing) /
00 (Red Flashing / Red Flashing)
09 – 5-8 : Unused
: 0 (remains the current display) / 1 (Call duration)
09 – 9
: Unused
09 – 11,10
09 – 12 : 0 (permit) / 1 (disallow)
09 – 13-16 : Unused
: Unused
10 – 1-16
10 9 8 7 6
0 0 0 1 1 0
5 4 3 2 1
0 0 0 0 1
ProgramminglTables