TP-Link TD-W8961ND Quick Installation Manual

Installation
Note
The product model shown in this QIG is TD-W8961ND, as an example.
Note
Please use only wired network connections to configure the router.
Power down all your network devices, including your computer(s) and the
Modem Router. If you currently use a modem, disconnect it now - the
Modem Router will replace your current modem.
Connect your computer to the
Port labeled "1~4" on the
Router with an Ethernet cable.
Connect the splitter to the wall
j ack using a telephone line,
then use the other telephone
line to directly connect it to the
A DSL port on the Router and
the MODEM
splitter, also have the PHONE
port of the splitter connected
to a telephone.
If no telephone is needed, please connect the ADSL port of the Router to
Note
the wall jack using the telephone line directly.
port of the
1