It is the responsibility of the installer to ensure that the continuous power rating of the speakers is not exceeded, as Drawmer Electronics Ltd will not accept any responsibility for damage caused by incorrect installation and settings. In the interests of product development, Drawmer reserve the right to modify or...
• Reduces sound system ’down time’ and the consequential loss of venue income • Isolation transformer output option. The SP2120 front panel features an integral security lock The SP2120 greatly benefits from Drawmer’s 25 years to ensure that adjustments to maximum volume levels are experience in designing industry standard dynamic implemented by key holders only.
(or before the active speakers), with the amplifier volume 19" rack mounting and occupies 1U of rack space. Where set to maximum. If the SP2120 were to be connected earlier possible, avoid mounting the unit directly above power in the chain, prior to the pre-amp/mixer for example, then...
CHAPTER 2 CONTROL DESCRIPTION SECURITY LOCK-OUT A lock prevents access to the front panel controls of the SP2120 once it has been calibrated. Unlock, calibrate, lock again. Only authorised personnel should be supplied with a key. CALIBRATE SET VU METER With the unit unlocked, rotate using a screwdriver to adjust the level of signal to the vu meters.
GENERAL INFORMATION It is the responsibility of the installer to ensure that the continuous power rating of the speakers is not exceeded, as Drawmer Electronics Ltd will not accept any responsibility for damage caused by incorrect installation and settings. CONTACTING DRAWMER IF A FAULT DEVELOPS Drawmer Electronics Ltd., will be pleased to answer all...
Need help?
Do you have a question about the SP2120 and is the answer not in the manual?
Questions and answers