Adjusting The Audio Settings - Vizio E420i-A0 User Manual

adjuStiNg the audiO SettiNgS

To adjust the audio settings:
1. Press the MENU button on the
remote. The on-screen menu is
displayed.
2. Use the Arrow buttons on the
remote to highlight Audio and
press OK. The Audio Settings
menu is displayed.
3. Use the Arrow buttons to
highlight the setting you wish
to adjust, then press Left/Right
Arrow to change the setting:
• Audio Mode - Change the
audio mode. This setting
is only available when SRS
StudioSound HD is set to
Standard.
• Balance - Adjusts the
loudness of the audio
output from the left and
right speakers.
• Lip Sync - Adjusts the syn-
chronization between the
display image and the
accompanying audio track.
• TV Speakers - Turns the
built-in speakers on or off.
• SRS StudioSound HD - StudioSound HD™ is a feature-rich
surround sound solution which delivers an immersive
surround sound experience from the TV's internal
speakers. Additionally, StudioSound HD completes the
entertainment experience by maintaining a steady
volume while watching programming and movies,
VIZIO
Audio Settings
Audio Mode Flat
-
+
Balance 0
-
+
Lip Sync 0
TV Speakers Off
SRS StudioSound HD Standard
SRS TruVolume On
Advanced Audio
Equalizer Settings
Reset Audio Mode
26
providing deep, rich bass, and delivering crisp details
and clear, intelligible dialog. Select Surround or Standard.
• SRS TruVolume - TruVolume
volume fluctuations due to television commercials or
channel changes. Select On or Off.
• Advanced Audio - See Adjusting the Advanced Audio
Wide Settings on page 27. Zoom Normal Panoramic
• Equalizer Settings - Adjust the boost or attenuation of
different frequencies. Change the equalizer presets by
selecting Flat, Rock, Pop, Classical or Jazz. To customize
Exit 2D 3D
the equalizer settings yourself, set EQ Mode to Advanced,
then adjust each frequency or set EQ Mode to Basic,
then adjust Bass and Treble settings. (This setting is only
ABC
available when SRS StudioSound HD is set to Standard)
• Reset Audio Mode - Restores the audio settings to the
Input Wide CC
factory defaults. See Resetting the Audio Settings on
page 27 .
4. When you have finished adjusting the audio settings, press
Sleep
Picture Audio
Timer
the EXiT button on the remote.
Network Settings Help
5
intelligently normalizes
™