Visonic GSD-442 PG2 Specification

GSD-442 PG2
PowerG Wireless Carbon
Monoxide (CO) Detector
•
Gives early warning of carbon monoxide (CO)
poisoning danger, providing visual and audial
alarm indications when CO is detected
•
Loud built-in alarm buzzer (95db) and a
large flashing LED
•
Continuous auto-testing and manual testing
•
Easy wall or ceiling installation (with
bracket); no need for cabling work
•
Simple battery replacement
•
Back tamper
•
PowerG two-way Frequency Hopping Spread
Spectrum FHSS-TDMA technology - provides
robustness and reliability closer than ever to
wired
•
Large transmission range enabling repeater-
free installations
•
Visible link quality indication shown on the
device
•
Compatible with PowerMaster systems and
PowerG receivers
•
Fully certified by the most strict and
demanding international standards for
safety products in Europe (LPCB UK,
EN 50291) and USA (UL 2075)
GSD-442 PG2 is a wireless CO detector
that gives early warning of CO
poisoning danger, preventing damage
to vital organs and even death. When
CO is detected, GSD-442 PG2 sends
alerts to the PowerMaster control
panel. A central station or private
number is then immediately notified.
This enables a rapid and effective
response to the emergency.

Specifications:

Battery type: 9V lithium battery
or alkaline battery,
Weight 180g (6.35oz)
(including battery):
Operating 0°C to 40°C
temperature: (32°F to 104°F)
Operating Indoor
environment:
Dimensions: 127 x 40mm
(5 x 1.6in.)