Box Contents • vTrue over-ear studio headphones • 3.5 mm (1/8”) Y-cable connector • 3.5 mm (1/8”) Y-cable with control module • 3.5 mm (1/8”) to 6.35 mm (1/4”) stereo adapter • Carrying pouch Specifications Driver size: 50 mm Frequency response: 10 Hz - 20 kHz...
Warnings, safety & care • To reduce the risk of fire or electric shock, do not expose vTrue headphones to rain or moisture, and do not open or attempt to open the control module, or any part of vTrue headphones.
How to connect To connect your vTrue headphones, plug the straight 3.5 mm (1/8”) Y-cable connectors into the ports of their respective ear cups. Each connector has a blue marking on the body of the connector. Match the connectors with the corresponding color under the left and right ear cups.
Page 5
Using the playback, volume, & phone controls The control module on the vTrue Y-cable has playback, volume, and phone controls so you can flow between listening to music, watching video, and talking on the phone when connected to devices that support these features.
Page 6
Limited warranty - U.S. and Canada only VELODYNE ACOUSTICS, INC. (“Velodyne”) warrants this product for a period of one year from the date of purchase against defects in materials and workmanship subject to the following conditions: This warranty is void if any repairs or service covered by the terms of this warranty are made to any component of this product by anyone other than a VELODYNE factory authorized service representative.
If VELODYNE determines that the unit is defective, VELODYNE will at VELODYNE’s option, repair or replace the product at no charge if the product is forwarded prepaid to a factory authorized service representative. Products forwarded to the factory authorized service representative should be shipped securely and properly packaged, insured and postage prepaid.
Need help?
Do you have a question about the vTrue and is the answer not in the manual?
Questions and answers