13 - Using Cds; Cd Drive Uses; Preparations Before Using Cds With This Unit; Types Of Cds That Can Be Used With This Unit - Tascam Digital Portastudio DP-03 Owner's Manual

8-track
Hide thumbs Also See for Digital Portastudio DP-03:
Table of Contents

Advertisement

13 – Using CDs

CD drive uses

This unit has a CD drive that supports writing to CD-R and
CD-RW discs. In addition to playing back Audio CDs (CD-
DA), the unit's CD drive can also be used for the following
purposes.
Create audio CDs from stereo master tracks that you
have made
Import tracks from audio CDs into the current song
Backup the current song to one or more CDs
Restore songs backed up on CDs to the unit
Preparations before using CDs with
this unit
When using CDs with this unit, please make the following
preparations.
Before using a CD, put the unit into
mode. If you press the CD button when in the mode
other than
MULTITRACK
and the
screen does not open.
CD
From
or
MIXDOWN
MASTERING
MIXDOWN/MASTERING button one or two times until
the unit is put in
MULTITRACK
mode, press the BOUNCE button to switch
In
BOUNCE
to
mode.
MULTITRACK
Open the
screen before inserting or ejecting a CD.
CD
NOTE
You can only unmount a CD from the
screens. In order to prevent the sound of the CD
PLAYER
drive being operated from occurring during recording, for
example, the power to the drive is disabled when in any
other mode besides CD mode (when the
of its submenus is open). For this reason, it is necessary
to put the unit into CD mode in order to load or eject a
CD. After a CD has been mounted (the
pop-up has appeared) return to the
screen to eject the CD.
Types of CDs that can be used with
this unit
This unit is compatible with 12-cm and 8-cm CD, CD-R,
CD-RW and CD-RW High Speed discs. CD-RW Ultra Speed
and CD-RW Ultra Speed+ CD-RW discs are not supported.
For the relationship between media types and CD
functions, see the "Media compatibility table" on page 76.
70
TASCAM DP-03
MULTITRACK
mode, a warning appears
mode, press the
mode.
and
CD
CD
screen or one
CD
CD MOUNTING
or
CD
CD PLAYER
Writing to an already written CD-RW
With this unit, you do not need to erase a CD-RW
beforehand. You can use a previously written CD-RW by
erasing it at the beginning of the desired operation.
When creating an audio CD or backing up a song, the
following message will appear if you insert an already
written CD-RW disc.
CD BACKUP confirmation screen
Press the F3 (
) button to erase the CD-RW disc and
YES
continue with the intended procedure (backup in the
example above).
If you do not want to erase the CD-RW disc, press the F4
(
) button. The disc tray will open slightly. Pull the tray
NO
out and replace the disc with another one.
CAUTION
If you use Track At Once to write a stereo master track
to an unfinalized CD-RW in audio CD format (a CD-RW
created using
MASTER WRITE
stereo master track and setting
track will be added without showing the CD-RW erasure
warning, and it will not overwrite existing data on the
disc.

Loading and ejecting CDs

Put the CD into the disc tray on the right side of the unit.
1 In MULTITRACK mode, press the CD button to open
the
screen.
CD
by selecting a single
to
), the
FINALIZE
OFF

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents