10 - Specifications; Media And Formats; Analog Audio Output; Digital Audio Output - Tascam CD-6010 Owner's Manual

Hide thumbs Also See for CD-6010:
Table of Contents

Advertisement

10 – Specifications

Media and formats

Device type
CD player
Compatible discs
Compact discs (12cm/8cm, including CD-R discs)
Playable disc types
CD-A, CD-ROM (ISO9660 LEVEL 1/2/JOLIET format)
Playable file formats
Audio CD (CD-DA), MP3 (MPEG Audio Layer III), WAV
MP3 playback specifications
Audio Modes: stereo/mono
Sampling Frequency: 32 kHz/44.1 kHz/48 kHz
Bit Rate: 32 kbps–320 kbps and VBR
WAV playback specifications
Sampling Frequency: 32 kHz/44.1 kHz/48 kHz
Sampling Bit Rate: 16 bit
Audio CD playback specifications
Sampling Frequency: 44.1 kHz
Sampling Bit Rate: 16 bit
Number of Channels: 2

Analog audio output

Analog outputs (unbalanced)
Connector: RCA pin jacks
Output impedance: 200 Ω
Standard output level: −10 dBV (0.32 Vrms)
Maximum output level: +6 dBV (2.0 Vrms)
Analog outputs (balanced)
Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Output impedance: 100 Ω
Standard Output level: +4 dBu (1.23 Vrms)
Maximum Output level: +24 dBu (12.28 Vrms)
PHONES connector
Connector: 6.3mm (1/4") standard stereo jack
Maximum output level: 45 mW + 45 mW or more
(THD+N 0.1% or less, 32Ω load)
38
TASCAM CD-6010

Digital audio output

Digital output connector (COAXIAL)
Connector: RCA pin jack
Supported signal formats: IEC 60958-3 standard for
consumer use, IEC 60958-4 for professional use
Output impedance: 75 Ω
Output level: 0.5 Vp-p
Digital output connector (XLR)
Connector: XLR-3-32 (1: GND, 2: HOT, 3: COLD)
Supported signal formats: IEC 60958-3 standard for
consumer use, IEC 60958-4 for professional use
Output impedance: 110 Ω

Control input and output

REMOTE connector
Connector: 2.5mm TRS jack
RS-232C connector
Connector: D-sub 9-pin (female, inch standard)
CONTROL I/O PARALLEL connector
Connector: D-sub 25-pin (female, inch standard)

Audio performance

Frequency response
20 Hz–20 kHz: ±0.5 dB (JEITA)
S/N ratio
95 dB or more (JEITA)
Dynamic range
95 dB or more (JEITA)
Distortion
0.005% or less (JEITA)
Channel separation
95 dB or more (1 kHz, JEITA)

Advertisement

Table of Contents
loading

Table of Contents