Names And Functions Of Parts; Front Panel - Tascam CD-6010 Owner's Manual

Hide thumbs Also See for CD-6010:
Table of Contents

Advertisement

2 – Names and Functions of Parts

Front panel

1 POWER switch
Press to turn the power on and off.
CAUTION
Before turning the power on, minimize the volume of other
equipment that is connected to this unit. Failure to do so
might cause sudden loud noises, which could harm your
hearing or result in other trouble.
2 Disc tray
Press the OPEN/CLOSE button to open the disc tray
when you want to load or remove a disc.
To close the disc tray, press the OPEN/CLOSE button
again.
3 OPEN/CLOSE button
Press to open and close the disc tray.
4 SHIFT button and indicator
Press this button to activate shift mode. When the
shift mode is active, the indicator lights and the shift
functions of other buttons are enabled. (Shift functions
are shown below buttons with white lettering on a
dark blue background.) After pressing one of these
buttons, shift mode is automatically ended and the
indicator becomes unlit.
NOTE
When in shift mode, press the SHIFT button again to end
shift mode (and turn off the indicator). After searching
folders/directories, if the SHIFT indicator is lit, press the
SHIFT button to end shift mode.
You can also press a button with a shift function while
pressing and holding the SHIFT button to use its shift
function.
5 DISPLAY [LOCK] button
Press this button when the playback time is shown to
switch the playback time display mode (track elapsed
time, track remaining time or total remaining time).
(See "Changing the playback time display mode" on
page 32.)
When in menu mode, press this button to exit menu
mode.
10
TASCAM CD-6010
To turn the panel lock function on and off, press and
hold this button when in shift mode (when the SHIFT
indicator is lit) or while pressing the SHIFT button.
This function prevents the use of the buttons to avoid
misoperation.
6 Display
Shows various types of information.
7 TRACK SKIP/DATA [INDEX/DIR SEARCH] knob
This is a multifunction knob that works as both a dial
and a button. Use this knob to select (skip) tracks,
select indexes, select directories, set the pitch control
value, use menus, set the A-B repeat interval and as a
jog dial, for example.
To select an index, turn this knob when in shift mode
(when the SHIFT indicator is lit) or while pressing the
SHIFT button. When working with a data CD, use this
function to select a directory. What happens after
selection depends on the auto cue function setting.
(See "Skipping to the next or previous track" on page
22.)
When in program setting mode, use this function to
select tracks.
When in menu mode, turn this knob to select items
and press it to confirm a selection. (See "Menu
operation basics" on page 19.)
When in pitch adjustment mode, turn this knob to
adjust the pitch value. (See "Pitch control playback" on
page 27.)
When in jog mode, use this knob as a jog dial to search
one frame at a time. (See "Using the jog function to
search" on page 23.)
When using the A-B repeat function, press this knob
to set the A and B points. (See "A-B repeat playback" on
page 26.)
8 JOG [PITCH] button
Press this button to start jog mode. (See "Using the jog
function to search" on page 23.)
To turn the pitch function ON/OFF, press this button
when in shift mode (when the SHIFT indicator is lit) or
while pressing the SHIFT button. (See "Pitch control
playback" on page 27.)

Advertisement

Table of Contents
loading

Table of Contents