Download Print this page

Talon Tools AT33641 User Manual

Petrol line trimmer

Advertisement

USER MANUAL
Petrol Line Trimmer
SAFETY
OPERATION
MAINTENANCE
WARNING • PLEASE READ
For your own safety please read this manual before attempting to operate your new unit. Failure to follow
instructions can result in serious personal injury. Spend a few moments to familiarize yourself with your trimmer
before each use.
MODEL NO. AT33641
9096-336404
WARRANTY INFORMATION
LINE TRIMMER WARRANTY
The benefits conferred by this warranty are in addition to all other conditions and warranties in respect of
this product which the consumer may have taken under the Trade Practices Act 1974 or by any legislation
of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520
939)(the "Company") to be free from defects in material and workmanship for a period of 24 months from
the date of original purchase. The Company during the period of the warranty, will at its option, and subject
to the conditions stated herein, repair or replace without charge this product or any component part, which
upon examination by an Authorised Service Agent or by the Company is found to be defective.
Warranty cond itions
This warranty will not apply:
(i) where this product has been subjected to misuse, abuse, accident or want of care;
(ii) where this product has been used for a purpose for which it was not designed or is not suited;
(iii) where the service of this product has been undertaken by a person not authorised by the Company
to carry out such work or where parts that have not been approved by the Company have been used;
(iv) where this product has been used for industrial or commercial purposes.
Should service become necessary during the warranty period, the purchaser should contact an Authorised
Service Agent or the Company. In order to obtain warranty service, the purchaser must present the store
receipt showing the name of the retailer and the date of purchase together with a completed Warranty
Card. The period of the warranty begins from the original date of purchase, notwithstanding any subse-
quent repair or parts replacement. No additional warranty or guarantee other than set out in this document,
whether written or verbal, is authorised to be made on the Company's behalf. The purchaser shall be
responsible for delivery or causing the product to be delivered to the Company or the Authorised Service
Agent and the purchaser shall be responsible for all charges in connection with re-delivery of the product
and/or the delivery of parts. Damage in transit is not covered by this warranty and purchasers should
remove from the product any liquids (if applicable) before sending and pack the product securely to prevent
damage.
Warran ty exclusion s
Normal wear parts or components are subject to separate terms as follows: Normal wear parts, compo-
nents or service required when performing normal and regular maintenance of this product are not covered
by warranty unless it is found to be defective by an Authorised Service Agent or by the Company. Normal
wear parts include, but are not limited to:
Worn Bump Head
Carburetor Tune-ups.
Trimming line.
Lubricants.
Spark Plugs.
Starter Assemblies.
Returns based on the above listed normal wear parts will not be accepted under this warranty as they
are considered consumable items and are at the expense of the purchaser.
Engine Tune-ups.
Filters.
2
AU

Advertisement

loading

Summary of Contents for Talon Tools AT33641

  • Page 1 Trade Practices Act 1974 or by any legislation of a State or Territory of Australia. This product is warranted by Talon Tools Australia (ABN 12 099 520 939)(the “Company”) to be free from defects in material and workmanship for a period of 24 months from USER MANUAL the date of original purchase.
  • Page 2: General Safety Rules

    GENERAL SAFETY RULES Meaning of symbols marked on the product The following basic troubleshooting checks can be easily carried out to determine whether or not the unit is running cor- rectly. If the unit will not operate after these checks then the product should be taken to an Authorised Service Agent for Warning! Hot surface Read the user manual before using the machine further inspection.
  • Page 3: General Identification

    SPECIFICATIONS Model No......AT33641 Engine Type ......Air-cooled, 2-Cycle, .
  • Page 4 ASSEMBLY INSTRUCTIONS • HANDLE ASSEMBLY NOTE: The Handle is attached to the shaft but has beened turned under for ease of pack- ing. Loosen adjustment knob (A) and rotate handle (B) to top of shaft. Position handle follow the arrow. See Fig.
  • Page 5: Trimming Instructions

    • TRIMMING PROCEDURES TRIMMING INSTRUCTIONS MAINTENANCE INSTRUCTIONS When properly equipped with a debris shield and linehead, • ADDITIONAL SAFETY PRECAUTIONS your unit will trim unsightly weeds and tall grass in those • REPLACING TRIMMING - LINE STANDARD hard-to-reach areas - along fences, walls, foundations and HEAD Before operating your unit, review ALL SAFETY around trees.
  • Page 6: Carburetor Adjustment

    • AIR FILTER • CARBURETOR ADJUSTMENT The carburetor was pre-set at the factory for optimum CAUTION: NEVER operate trimmer without performance. If further adjustments are necessary, please the air filter. The air filter must be kept clean. take your unit to the nearest Authorized Service Center. If it becomes damaged, install a new filter.