Advertisement
Quick Links
NO PART OF THIS DOCUMENT MAY BE REPRODUCED WITHOUT PRIOR AGREEMENT AND WRITTEN PERMISSION OF
Please contact the Tech Line for the most current instruction information (800) 367-3788
! ! ! PLEASE READ THE FOLLOWING INSTRUCTIONS CAREFULLY PRIOR TO INSTALLATION ! ! !
GENERAL INFORMATION:
This engine assembly is built with current production 5.0L H.O. crankshaft, rods and pistons, resulting in a 50 oz. external
balance requirement. The damper & flywheel included are compatible with this balance specification. The damper and
flywheel combination for your particular installation may need re-balance or some other modification for compatibility.
(See #4 & #5 for more details on balance). This engine is intended for off-road applications and can be adapted to most
289-302 situations.
THIS LONG BLOCK IS FOR OFF-ROAD USE ONLY AND DOES NOT HAVE A WARRANTY
! ! ! WARNING: THIS ENGINE DOES NOT CONTAIN ANY CRANKCASE OIL ! ! !
PARTS INCLUDED IN THIS LONG BLOCK ASSEMBLY KIT:
5.0L PRODUCTION SHORT BLOCK
SVO GT-40 CYLINDER HEAD ASSEMBLY
SVO ROLLER CAM
Ford Racing Performance Parts engineers recommend the use of their line of performance intake systems, coupled with
performance pulleys, headers and ring & pinion sets, for optimum performance.
Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356
M-6007-B50/B51/XE3/XB3
Engine
INSTRUCTION SHEET
FORD RACING PERFORMANCE PARTS
M-6007-B50/B51
M-6049-Y303
M-6250-B303(B50)
M-6250-E303(B51)
Tech Line (800) 367-3788
Page 1 of 6
M-6007-XB3/XE3
M-6049-X303
M-6250-B303(XB3)
M-6250-E303(XE3)
IS-1850-0088
Advertisement
Related Manuals for Ford M-6007-B50
Summary of Contents for Ford M-6007-B50
- Page 1 SVO GT-40 CYLINDER HEAD ASSEMBLY SVO ROLLER CAM Ford Racing Performance Parts engineers recommend the use of their line of performance intake systems, coupled with performance pulleys, headers and ring & pinion sets, for optimum performance. Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356...
- Page 2 1976 on all applications. Pay attention to intake gasket fit. A Performer RPM or RPM Air Gap intake is suggested when using a carburetor. A GT-40 or Cobra intake is suggested for EFI. Suggested carburetor size is 600-650 cfm. The suggested injector size with M-6007-B50/B51 is 24 lbs. The suggested injector size with M-6007-XE3/XB3 is 30 lbs.
-
Page 3: Application Information
M-6375-B302 (cast iron) M-6375-C302 (billet steel) Flywheel (automatic) M-6375-A50 (164 AOD/C-4) M-6375-E302 (157 C-4) M-6375-J302 (C-6) Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356 FORD RACING PERFORMANCE PARTS Chrome Painted Tech Line (800) 367-3788 Page 3 of 6... - Page 4 Install the distributor into the engine block opening. It may be necessary to slightly rotate the rotor/shaft assembly until the drive gear “drops” into position. Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356 FORD RACING PERFORMANCE PARTS PRIMING THE LUBRICATION SYSTEM ! ! !
- Page 5 Check the crankshaft damper bolt. It must be torqued to 70-90 ft/lbs. ! ! ! CAUTION: THE CRANKSHAFT DAMPER BOLT MUST BE TORQUED CORRECTLY TO PREVENT DAMAGE Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356 FORD RACING PERFORMANCE PARTS...
-
Page 6: Torque Specs
*Head Bolts (Torque to Yield) Intake Bolts 18 ft./lbs. Maximum with aluminum heads *Utilized in FRPP M-6051-A50 high performance gasket kits Factory Ford shop manuals are available from Helm Publications, 1-800-782-4356 FORD RACING PERFORMANCE PARTS M-6250-E303 Maximum Valve Lift .498 Duration at .050 lift 220...