Specifications - General - Honeywell 11280S Specification

Smart actuator
Hide thumbs

Advertisement

Set Up Group
SET LOCK Enables lock
out or access to selected
set up group parameters
and calibration values.
READ STATUS
Displays failsafe condition
and the results of various
diagnostics performed
during power up.
SET DRVINF Allows
access to actuator device
information.
SET MAINT Allows
access to parameters that
monitor operating
conditions.
Physical
Enclosure
Gear Train
Operating Temperature
Storage Temperature
Relative Humidity
Crank Arm
Rotation
Direction of Rotation
Manual Handwheel
Lubrication
Weight
Configuration Parameter Selections/Settings
LOCKID – Set Security Password
LOCK – Lock Out
FAILSF – Failsafe
RAMTST – RAM Test Diagnostic
SEETST – Serial EEPROM Test
Diagnostic
VERSON – Firmware Version
SPEED – Stroke Speed
POWER – Power Input Voltage and Line
Frequency
TAG – Tag Name
TEMP – Actuator Temperature
TEMPHI – High Temperature Limit
TEMPLO – Low Temperature Limit
ACST – Accumulated Motor Stall Time
STARTS – Accumulated Motor Starts
Specifications – General
Precision-machined ductile iron with corrosion resistant paint
Precision-machined double reduction worm gear
-30 °C to +65 °C (-20 °F to +150 °F)
except Model 11287S which has a range of: -20 °C to +65 °C (-4 °F to +150 °F)
-40 °C to +93 °C (-40°F to +200 °F)
0-99% R.H. noncondensing, over the full operating temperature range.
Adjustable radii (8" to 14") crank arm is standard
Factory set to 90 degrees, for 0% to 100% travel
Field programmable via local display and keypad
Provides a means of positioning the actuator in the event of a power failure or set-up
Mobil Synthetic bearing and gear lubricant SHC 634 (ISO 460) or equivalent
300 lb to 600 lb (136 kg to 272 kg)—See Table below for more information.
CFGTST – Configuration Test Diagnostic
CALTST – Calibration Test Diagnostic
MFGDAT – Manufacturing Date
LREP – Date of Last Repair
LCAL – Date of Last Field Calibration
REPTYP – Repair Type
RLnCNTS – Relay Cycle Counts
REGNn – Accumulated Motor Starts
(Regions of Travel)
TOTDEG – Total Degrees of Motor Travel
MANRST – Reset Maintenance Statistics
Specifications continued on next page
61-86-03-13
Page 5

Advertisement

loading

  Related Manuals for Honeywell 11280S

Table of Contents