Local Display And Keypad - Honeywell 11280S Specification

Smart actuator
Hide thumbs

Advertisement

Configuration and set-up is through the local HMI, consisting of a display and keypad interface (Figure 2). A high intensity
10-character LED display and simple pushbuttons provide quick access for actuator set up and status information. If relay
outputs are specified, all configuration can be done through either the local HMI interface. If mechanical switches are
specified, then the user must manually set the auxiliary output.
Upper Display
(Four Characters)
Lower Display
(Six Characters)
Pushbuttons to
Access Actuator
Set Up, Status and
Calibration
Parameters.
Non-Contact Sensor
Sensing PW A

Local Display and Keypad

Control Arm Rotation
Indicators
CCW
SET UP
FUNCTION
MAN/AUTO
Figure 2 Local HMI (Display and Keypad)
Non-Contact Sensor Spoiler
Figure 3 Non-Contact Sensor Assembly
CW
STALLED
ALARM
MANUAL
AUTO
DISPLAY
61-86-03-13
Page 3
LED Status
Indicators

Advertisement

loading

  Related Manuals for Honeywell 11280S

Table of Contents