Copyright Notice; Declarations Of Conformity - Apogee X-Video Card User Manual

X-series expansion cards
Hide thumbs Also See for X-Video Card:
Table of Contents

Advertisement

X-Video – User's Guide
Warnings
FCC warning
This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when
operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy
and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which
case the user will be required to take whatever measures necessary to correct the interference at his own expense.

Copyright Notice

The Apogee X-Video card is a computer-based device, and as such contains and uses software in ROMs. This
software, and all related documentation, including this User's Guide contain proprietary information which is
protected by copyright laws. All rights are reserved. No part of the software and its related documentation may be
copied, transferred, or modified. You may not modify, adapt, translate, lease, distribute, resell for profit or create
derivative works based on the software and its related documentation or any part thereof without prior written
consent from Apogee Electronics Corporation, U.S.A.

Declarations of Conformity

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference
(2) This device must accept any interference received, including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful inteference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
1. Re-orient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a different circuit from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.
NOTE: The use of non-shielded cable with this equipment is prohibited.
CAUTION: Changes or modifications not expressly approved by the manufacturer responsible for compliance could void the user's authority to
operate the equipment.
Apogee Electronics Corporation, 1715 Berkeley St., Santa Monica, CA 90404.
Betty Bennett, CEO.
Industry Canada Notice
This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulations. Cet appareil numérique
de la classe B respecte toutes les exigences du Règlement sur le matérial brouilleur du Canada.
Declaration of Conformity – CE
Apogee Electronics Corporation hereby declares that the product, the X-Video card, to which this declaration relates, is in material conformity
with the following standards or other normative documents:
• EN50081-1/EN55022; 1995
• EN50082-1/IEC 801-2, 3, 4; 1992
following the provisions of:
• 73/23/EEC – Low Voltage Directive
89/336/EEC – EMC Directive
Declaration of Conformity – Japan
Apogee Electronics Corporation hereby declares that the X-Video card, to which this declaration relates, is in material conformity with the VCCI
Class A standard.
Declaration of Conformity – Australia
Apogee Electronics Corporation hereby declares that the X-Video card is in material conformity with AN/NZS standard requirements.
b

Advertisement

Table of Contents
loading

This manual is also suitable for:

X-series

Table of Contents