American DJ P64 LED User Instructions
Hide thumbs
Also See for P64 LED:
- User instructions (6 pages) ,
- User instructions (6 pages) ,
- User instructions (9 pages)
Advertisement
Quick Links
User Instructions
Rev. 12/06
Unpacking:
Every P64 LED has been thoroughly tested and has been shipped in
perfect operating condition. Carefully check the shipping carton for
damage that may have occurred during shipping. If the carton appears
to be damaged, carefully inspect your fixture for any damage and be
sure all accessories necessary to operate the unit has arrived intact. In
the case damage has been found or parts are missing, please contact
our toll free customer support number for further instructions. Do not
return this unit to your dealer without first contacting customer sup-
port.
Introduction:
suit for creating high quality affordable intelligent fixtures. The P64 LED
is a DMX intelligent LED Par Can. This Par Can is light weight and com-
pact which makes it a great piece for mobile DJ's and clubs. This unit
can be used as a stand alone, or a sound-active mode. The unit can
also be controlled via DMX controller.
Customer Support:
port line, to provide set up help and to answer any question should you
encounter problems during your set up or initial operation. You may
also visit us on the web at www.americandj.com for any comments or
suggestions. Service Hours are Monday through Friday 9:00 a.m. to
5:00 p.m. Pacific Standard Time.
To purchase parts online visit http://parts.americandj.com
Warning!
not expose this unit to rain or moisture.
Caution!
attempt any repairs yourself, doing so will void your manufactures war-
ranty. In the unlikely event your unit may require service please contact
American DJ
PLEASE recycle the shipping carton when ever possible.
American DJ
®
4295 Charter Street
Los Angeles Ca. 90058
www.americandj.com
P64 LED
Thank you for purchasing the P64 LED by American DJ
The P64 LED is part of American DJ's continuing pur-
American DJ
Voice:
(800) 322-6337
Fax:
(323) 582-2610
E-mail:
support@americandj.com
To prevent or reduce the risk of electrical shock or fire, do
There are no user serviceable parts inside this unit. Do not
.
®
American DJ Supply
- www.americandj.com - P64 LED Instruction Manual Page 2
©
®
Introduction
provides a toll free customer sup-
®
.
®
Advertisement
Related Manuals for American DJ P64 LED
Summary of Contents for American DJ P64 LED
- Page 1 Thank you for purchasing the P64 LED by American DJ ® Every P64 LED has been thoroughly tested and has been shipped in perfect operating condition. Carefully check the shipping carton for damage that may have occurred during shipping. If the carton appears to be damaged, carefully inspect your fixture for any damage and be...
-
Page 2: General Instructions
Allow about 6” (15cm) between this device and a wall. • Do not attempt to operate this unit, if it becomes damaged. The P64 LED carries a 1 year (365 days) limited warranty. Please fill • This unit is intended for indoor use only, use of this product out` out the enclosed warranty card to validate your purchase and war- doors voids all warranties. -
Page 3: Power Supply
PIN 3 (DMX +) of the last fixture. Data Cable (DMX Cable) Requirements (For DMX Operation): The P64 LED can be controlled via DMX-512 protocol. The P64 LED is a 5-Pin XLR DMX Connectors. Some manufactures use 5-pin XLR six channel DMX unit. -
Page 4: Operating Modes
® ® colors. 2. The P64 LED uses six DMX channels to operate see page 9 for the DMX traits. • RGB Mode - Choose a single color or colors to stay static. • DMX control mode - This function will allow you to control each 3. -
Page 5: Troubleshooting
1. Quiet or high pitched sounds will not activate the unit. used. When units are daisy chained together in DMX Mode, If problems are not resolved; Contact American DJ® for service. channels 1, 2, and 3 must be “OFF” for units to sync together 1-800-322-6337 when using Channel 4. -
Page 6: Warranty
® tive parts at its expense, and will absorb all expenses for warranty service and repair labor by reason of defects in material or workmanship. The sole responsibility of American DJ ® under this warranty shall be limited to the repair of the product, or replacement thereof, including parts, at the sole discretion of American DJ .