Page 2
This warranty is void if the product is repaired or modified in any way by anyone other than an authorized service center. This and high-quality product. As with all of our products, your CV12 or CV16 is backed by our uncompromising warranty also does not cover normal wear items such as the following: brush, brush rolls, switches, belts, bags, filters, power cords, casters, wheels, and gaskets.
ENGLISH Important Safety Instructions Important Safety Instructions (cont.) SAVE THESE INSTRUCTIONS • If vacuum cleaner is not working as it should— WARNING or has been dropped, damaged, left outdoors, or When using an electrical appliance, basic precautions • DO NOT leave power cord lying on floor when not exposed to water—discontinue use immediately ELECTRICAL SHOCK HAZARD should be followed, including the following:...
ENGLISH Package Contents Assembled Views Please confirm that all items shown in the image below are included in the packaging. upper If any parts are missing, please call customer service at 1-866-524-5233. cord wrap Tool Needed handle grip handle release pedal Bag Assembly upper cord spring...
Page 5
ENGLISH Assembly Tool needed Insert lower handle tube into base stem of vacuum cleaner. Slide upper handle tube over lower handle tube. Position Insert tab on bottom of cloth bag into bracket on rear of vacuum Slide ring at top of cloth bag spring onto triangular hook on cleaner base.
Page 6
ENGLISH Cloth Bag Replacement Cord Storage Paper Bag Replacement Wrap power cord around upper and lower cord wraps. Remove ring at top of cloth bag spring from triangular hook Unplug before servicing. Unplug before servicing. on rear of upper cord wrap. Lay old cloth bag flat on floor. Turn latch to disengage post on base of vacuum cleaner.
Page 7
Belt and Brush Roll Replacement (cont.) Turn vacuum cleaner over. Turn latches on either side of nozzle Remove old belt from pulley. Lift brush roll to remove from guard to release. Remove nozzle guard. nozzle opening. Slide left side of belt onto pulley. Turn pulley clockwise to Loop new belt into groove on brush roll.
Need help?
Do you have a question about the CV12 and is the answer not in the manual?
Questions and answers