Download  Print this page

Copy Mode - Mitsubishi Electric FR-A500 Instruction Manual

Transistorized inverter.
Hide thumbs

Advertisement

3.2.8

Copy mode

By using the operation panel (FR-DU04), the parameter values can be copied to other FR-A500 series
inverter.
1) Operation procedure
After reading the parameter values from the copy source inverter, connect the operation panel to the copy
destination inverter, and write the parameter values.
After writing the parameters to the inverter of copy destination, always reset the inverter, e.g. switch power
off once, before starting operation.
Parameter setting mode
FR-DU04
CONTROL PANEL
Hz
A
V
MON
EXT
PU
REV
FWD
FR-DU04
CONTROL PANEL
Hz
A
V
MON
EXT
PU
REV
FWD
Note: 1. While the copy function is being activated, the monitor display flickers. The display returns to the
lit-up state on completion of the copy function.
2. If a read error occurs during parameter read, "read error (E.rE1)" is displayed.
3. If a write error occurs during parameter write, "write error (E.rE2)" is displayed.
4. If a data discrepancy occurs during parameter verify, the corresponding parameter number and
"verify error (E.rE3)" are displayed alternately. If the direct frequency setting or jog frequency
setting is discrepant, "verify error (E.rE3)" flickers. To ignore this display and continue verify,
press the
SET
5. When the copy destination inverter is not the FR-A500 series, "model error (E.rE4)" is displayed.
Reference:
It is recommended to read the parameter values after completion of parameter setting.
(When performing auto tuning, it is recommended to perform parameter read after
completion of auto tuning.)
By writing the parameter values from the operation panel fitted to a new inverter after
inverter replacement, parameter setup can be completed.
FR-DU04
CONTROL PANEL
Hz
MON
EXT
PU
REV
FWD
FR-DU04
CONTROL PANEL
Hz
SET
MON
EXT
PU
REV
FWD
Press for
(Note 1)
SET
1.5 s
FR-DU04
CONTROL PANEL
Hz
MON
EXT
PU
REV
FWD
Parameter read
Connect to copy destination inverter.
key.
A
V
FR-DU04
CONTROL PANEL
A
V
MON
EXT
REV
Press for
(Note 1)
SET
1.5 s
FR-DU04
CONTROL PANEL
A
V
MON
EXT
REV
Parameter write
After writing the parameters,
always reset the inverter before
operation.
56
OPERATION/CONTROL
FR-DU04
Hz
A
V
PU
MON
EXT
FWD
REV
Press for
SET
1.5 s
FR-DU04
Hz
A
V
PU
MON
EXT
FWD
REV
Parameter verify
CONTROL PANEL
Hz
A
V
PU
FWD
(Note 1)
CONTROL PANEL
Hz
A
V
PU
FWD

Advertisement

Table of Contents

   Related Content for Mitsubishi Electric FR-A500

Comments to this Manuals

Symbols: 0
Latest comments:
  • Rajesh yadav Nov 23, 2017 01:03:
    electrical controling conction manual
  • TAtang Jan 03, 2017 11:22:
    Jalan sebentar terus muncul E,7 errlor
  • THAI Sep 28, 2015 08:47:
    MANUAL INVERTER MITSUBISHI a100 .thank you very much
  • sandeep Feb 15, 2014 09:20:
    good manual and it is very good to understand the contant of inverter and i lernt many things in this manual