Table Of Contents; Exiting Scheduling Mode - Honeywell T775U Series 2000 Installation Instructions Manual

Electronic stand-alone controller
Hide thumbs Also See for T775U Series 2000:
Table of Contents

Advertisement

T775U SERIES 2000 ELECTRONIC STAND-ALONE CONTROLLER
Fig. 83. Schedule - Event 1 Time.
Fig. 84. Scheduling Mode Exit.
62-0255-07
4.3.2. E1 TIME (time for event 1)
E1 TIME
2. Press the
ting for event 1.
3. Use the
minute, and AM/PM values.
6:00 AM
4. Use the
desired value for the hour, minute, and AM/PM.
SET
TIME
FOR
EVENT 1
M24627
4.3.3. E2 SETPOINT (setpoint for event 2)
Creating the setpoint for event 2 is accomplished the
same way as the first event. See "4.3.1. E1 SETPT
(setpoint for event 1)" on page 35 above.
Creating the time for event 2 is accomplished the same
way as the first event. See "4.3.2. E1 TIME (time for event
1)" above.
4.3.5. EXIT (exit from selected time period
settings)
After entering the time for event 2, use the
the schedule time period and return to the Schedule menu
to select a different time period.
When you finish scheduling the time periods, continue
with "4.4. Exiting Scheduling Mode".
Press the HOME button to exit the Schedule menu and
MENU
return to the home screen display.
PROGRAM
or
SCHEDULE
Press the
SUMMARY
EXIT
and
buttons to highlight EXIT from the menu and press
the
button.
This completes the Scheduling procedure.
M24628
36
buttons to highlight E1 TIME.
button to display the current time set-
button to cycle between the hour,
and
buttons to increase/decrease the
button to accept the time and return to
button to return to the menu, then use the
and
button to exit

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents