Tone Settings; Accessory Settings - Nokia 6610 User Manual

M e n u f u n c t i o n s
Display brightness
You can change the display
brightness level used on the phone
display.
Press Menu, and select Settings,
Display settings and
brightness. Scroll with
to decrease and increase the
brightness level, and press
accept it.

Tone settings

Press Menu, and select
then Tone settings. You can find the
same settings in the
see "Profiles (Menu 3)"
Note that the settings you make,
change the settings in the active
profile.
Select Incoming call alert
how the phone notifies you of an
incoming voice call. The options are
Ringing, Ascending,
once and Off.
Select Ringing tone
voice calls. To select ringing tones
that have been saved in the Gallery,
select Open gallery
tone list.
Select Ringing volume
Vibrating alert for incoming voice
calls and messages. The vibrating
alert does not work when the phone
is connected to a charger, a desktop
stand, or a car kit.
42
Display
and
OK to
Settings and
Profiles menu,
on page 36.
to select
Ring once, Beep
for incoming
from the ringing
and
Copyright © 2004 Nokia. All rights reserved.
Tip: If you receive a ringing
tone via OTA or by
downloading, you can save
the ringing tone in the
Gallery.
Select Message alert tone
alert tone for the incoming
messages, Keypad
Warning tones to set the phone to
sound tones for example, when the
battery is running out of power.
Select Alert for to set the phone to
ring only upon calls from phone
numbers that belong to a selected
caller group. Scroll to the caller
group you want or
Mark.

Accessory settings

Accessory settings menu is shown
only if the phone is or has been
connected to one of the accessories,
for example headsets HDB-4 or
HDS-3, handsfree unit CARK126.
Press Menu, and select
Accessory settings. You can select
Headset, Handsfree,
Music stand if the corresponding
accessory is or has been connected
to the phone.
• Select Default profile
the profile you want to be
automatically activated when
you connect the selected
accessory. You can select another
profile while the accessory is
connected.
to set the
tones, or
All calls and press
Settings and
Loopset or
to select