Advertisement
G e t t i n g s t a r t e d
When using batteries as a power source, the Nokia Image Viewer
automatically enters sleep mode, if no control buttons have been
pressed for a while. Press any control button to stop the sleep mode.
7. To switch on the Nokia Image Viewer, press and hold
unit until the red indicator light turns on. Note that you cannot switch
the power on with the remote control.
8. Connect the RCA connector from the Nokia Image Viewer to a TV.
If your TV does not have a RCA connector, you need a RCA/SCART
adapter, which you can obtain from an electrical supply store. If you
are using a wide screen TV set, the TV screen should be set to a 4/3
ratio.
9. Open the RCA input channel in the TV. The Nokia logo is shown on the
TV screen when the correct channel is opened.
10. Unwrap the Pop-Port
and connect it to the compatible phone's Pop-Port
the phone is switched on.
A progress bar is displayed on the TV while the images are transferred
from the phone. While the progress bar is displayed, pressing any of
the buttons on the main unit or the remote control will have no effect.
If no progress bar is shown, switch the phone off and then on again.
11. When you want to stop using the Nokia Image Viewer, press and hold
to switch off the power. Note that you cannot switch the power off
with the remote control.
8
TM
connector from the bottom of the main unit
on the main
TM
. Make sure that
Advertisement
