Troubleshooting Guide - Niles SI-2125 Installation & Operation Manual

Systems integration amplifier
Hide thumbs Also See for SI-2125:
Table of Contents

Advertisement

TROUbLeShOOTING GUIde

When there is a problem consult this guide first. If the problem persists, or you
have additional questions, call your local niles dealer or niles technical Support
at 1-800-289-4434. the most common problems relate to hook up. call from
your telephone extension nearest the system.
SyMPTOM
No sound on one channel
No sound on both channels
Hum from the speakers
POSSIbLe CAUSeS ANd TeST PROCedURe
Short circuit or loose wire at the speaker or
amplifier terminals. check that the connections are
secure and that there are no loose strands of wire
crossing from the positive to the negative terminals
at the back of the amplifier and /or the speaker.
Short circuit or a break in the speaker wire. dis-
connect the speaker wire at both ends, separate the
2 conductors at both ends and test with a meter for
a short circuit. If there is no short, connect the two
conductors at one end and test with a meter for
continuity.
Speaker is not working. connect the speaker to a
channel that plays another speaker.
Audio cable to input is bad. connect another cable
that is known to be good.
Audio cable to the main inputs is bad. connect
another cable that is known to be good.
hum may be caused by a ground loop between
two of the other components in the system. to test
for another ground loop, try reversing the Ac plugs
of each of the components in the system.
16

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents