Building In The Appliance - Miele KM 400 Installation Instructions Manual

Building in the appliance

^ Guide the hob electric cable down through the cut-out and connect the
appliance to the electricity supply.
^ Position the hob. Then with a hand on each side of the hob, press down on the
fixing points of the spring clamps a on the top and bottom edges until it clicks
into place. When doing this take care that the seal of the hob is lying flat above
the worktop on all sides. This is important to ensure an effective seal on all
sides.
The hob can now only be removed with a special tool.
Installation
13