Using The Gas Hob; Switching On, Adjusting The Flame And Switching Off - Miele KM 362 G Operating Instructions Manual

Using the gas hob

Switching on, adjusting the
flame and switching off
The control is used to switch on the
burner and regulate the strength of the
flame.
ß the gas supply is turned off
& strong flame
/ weak flame
16
The burners can only be switched
on by pressing in the appropriate
control and turning it anti-clockwise,
and switched off by turning the
control clockwise.
- Trying to switch on a burner
without pressing in the control,
- Switching on a burner by
turning it clockwise, or
- Switching off a burner by
turning it anti-clockwise,
can damage components in the
appliance. The manufacturer cannot
be held liable for this type of
damage.
To switch on:
^ The control for the burner required
must be pressed in and turned
anti-clockwise to the large flame
symbol to switch on.
^ When the flame ignites, keep the
control pressed in for 8-10 seconds,
and then let it go.
If the flame goes out, repeat the
procedure, keeping the control pressed
in for a few extra seconds.