Table of Contents
Advertisement
Altering the residual moisture
level in the Synthetics
programme
The machine is designed to dry
effectively using as little energy as
possible.
However, if you require the laundry to
be drier, it is possible to reduce the
default residual moisture level in the
Synthetics programme. Please note
that programme durations will be
longer if this option is activated.
Follow steps A to F to programme and
store in memory.
Before you begin, first ensure that:
– The tumble dryer is switched off.
– The door is closed.
Programmable functions
A Press the Start/Stop button and keep
it pressed in whilst carrying out steps
B-C.
B Press the I-On/0-Off button in.
Wait until the indicator light for the
Start/Stop button lights up constantly . . .
C . . . and then release the Start/Stop
button.
D Press the Buzzer button once.
– The Buzzer indicator light will briefly
flash on and off three times.
– P and 0 will flash alternately in the
display
(factory default setting).
The number which appears alternately
in the display with P means:
0 Default residual moisture setting
i Drier setting (the Drying indicator
light will also flash)
E Pressing the Start/Stop button
switches from one number to the
other.
F Switch the machine off with the
I-On/0-Off button.
The setting you have selected is now
stored in memory. You can change it
again at any time.
47
Advertisement
Table of Contents
