Ventilation; Installation; Aligning The Appliance - Miele FN 14827 S Operating And Installation Manual

Operating in a room which is too cold
will result in the cooling system
switching off for too long, causing the
internal temperature in the appliance to
rise with the risk of frozen food
deteriorating and going off.

Ventilation

Air at the back of the appliance gets
warm. To ensure sufficient ventilation,
the air inlet and outlet must not be
covered or blocked in any way. They
should be dusted on a regular basis.

Installation

^ Remove the cable clip from the back
of the appliance.
^ Check that all parts at the back of the
appliance are unhindered. Carefully
remove any hindrance.
^ Carefully push the appliance into
position with the back against the
wall.

Aligning the appliance

^ To align the appliance, adjust the feet
using the spanner supplied.
Stainless steel appliances
^ If necessary, also align the two rear
adjusting devices a using socket
wrench b.
Turn the adjusting device clockwise
to raise the appliance up at the back.
Levelling the appliance door
^ Ensure that you unscrew adjusting
foot c from the hinge plate until it sits
on the floor. Then unscrew the foot by
a further 90°.
Installation
39