Miele H 4880 BP Pyrolytic Operating And Installation Manual page 52

Cleaning and care
During the pyrolytic process the oven is
heated to approx. 460 °C. Any residual
soiling is burnt off by the high
temperatures.
The pyrolytic programme duration will
vary depending on the level of soiling.
For safety reasons the oven door is
automatically locked at the beginning
of the pyrolytic programme.
At the end of the programme it will not
be unlocked until the temperature
inside the oven has dropped to below
280 °C.
If the pyrolitic cleaning programme has
been started by mistake or if the
process is interrupted, the door lock will
be released:
– immediately if the temperature is
below 280 °C.
– not until the oven interior temperature
is below 280 °C if the temperature
inside the oven is higher than
280 °C.
52
Starting a pyrolytic process
^ Take all accessories out of the oven.
^ Select the "PYROLYTIC" function.
^ Start the pyrolytic cleaning process.
The appliance door will lock.
You can delay the start of the
pyrolytic process for example, to take
advantage of cheaper night electricity
tarifs. To do so:
^ Call up "Start time" and select a time
to start the programme at.
You can change the start time if you
wish at any time up until the delay
period has elapsed.
At the end of the programme a buzzer
will sound and the message "Ready"
will appear in the display.
^ Switch off the oven.
After the pyrolytic process any debris
(e.g, ash), can easily be wiped away.
Remember to wait until the oven has
cooled down before doing so!
Danger of burning.
Try not to wipe the fibre-glass seal
when cleaning the oven cavity. It is
particularly sensitive and should not
be cleaned unless absolutely
necessary. Rubbing it can damage it.