Hob Controls - Miele H 250 Operating Instructions Manual

Electrical connection
All electrical work should be under-
taken by a suitably trained and com-
petent person in strict accordance
with national and local safety regula-
tions.
The
on the data plate, visible when the
oven door is open. Ensure that these
match the household mains supply.
Please quote these data, and the
model and serial number when contact-
ing the Miele Service dept.
Connection of this appliance should be
made either via a fused connection unit
(rated load under 3000 W), or via a suit-
able isolator (rated load over 3000 W),
which complies with national and local
regulations, and which is accessible
after the appliance has been built in.
60
Q\}
Q\}
are given
The appliance is supplied with a 3-core
cable for connection to a single phase
230-240 V 50 Hz supply, with 20 amp
fusing.
The wires are coloured in accordance
with the following code:
Green/yellow = earth
Blue = neutral
Brown = live
In other countries check these details
with your supplier.
The version of the built-in oven with
hob controls may only be combined
with one of the hobs listed, (not all units
are available in every country):
KM 213
KM 215
KM 200