Fitting A Plinth Facing - Miele W 2129 Operating Instructions Manual

Fitting a plinth facing

The gap between the lower edge of the
washing machine plinth and the floor
can be closed up using a suitable
kitchen furniture plinth facing.
The washing machine plinth has a
special groove in which a plinth facing
can be fitted.
Plinth facing dimensions
Length: 592 - 596 mm
Thickness: 8 mm
Height (H): The plinth facing height
must be calculated after aligning the
height of the machine with the screw
feet or after fitting the raising kit(s).
Installation
^ Calculate height (H) from the floor up
into the groove (on the underside of
the washing machine).
^ Cut the plinth facing to size.
^ Slide it into the groove.
Useful tip:
If the machine is fitted on a
height-adjustment frame, you can use
double-sided adhesive tape on the
back of the plinth facing to secure it to
the raising kit.
Installation
53