Switching On - Miele KM 500 Operating And Installation Manual

Operation

Switching on

The hob must be switched on before
any of the zones can be used.
Do not leave the appliance
unattended whilst it is being used.
To switch the hob on:
^ Touch the ON/OFF sensor s.
0 appears in each of the cooking zone
displays. If no further entry is made, the
hob will switch itself off after a few
seconds for safety reasons.
To switch a cooking zone on:
^ Briefly touch the area under the
cooking zone display required once.
A 0 will flash in the display.
^ Whilst the 0 is flashing, select a
power setting of between 1 and 9 by
touching the - or + sensor.
18
To select cooking with Auto heat-up,
press the - sensor first (see "Auto
heat-up"). To select cooking without
Auto heat-up, press the + sensor first.
The power setting selected flashes in
the display for a few seconds to start
with and then lights up constantly.
To change a power setting which has
already been set, touch the sensor for
the relevant zone once briefly. The
power setting can then be changed
using the - and + sensors.