Download Print this page

Electrical Connection Aus/Nz - Miele KM 460 Operating Instructions Manual

Ceramic
Hide thumbs

Advertisement

Electrical connection AUS/NZ

All electrical work should be carried out
by a competent person, in strict
accordance with national and local
safety regulations.
The voltage and rated load are given
on the data plate. Please ensure that
these match the household mains
supply.
After the appliance has been built in, a
check must be made that all electrical
parts are shielded.
Connection for each appliance should
be made via a suitable isolator, which
complies with national and local safety
regulations and which is accessible
after the appliance has been built in.
For extra safety it is advisable to install
a residual current device (RCD), with a
trip current of 30 mA.
Important
The wires in the mains lead are
coloured in accordance with the
following code:
Green/yellow = earth
Blue
= neutral
Brown
= live.
WARNING:
THIS APPLIANCE MUST BE
EARTHED
Electrical connection
Ensure power is not restored to the
appliance while installation work is
being carried out.
Test marks
Electrically suppressed according to
AS/NZS 1044
Electrical safety,
C-Tick Mark
33

Hide quick links:

Advertisement

loading

  Also See for Miele KM 460

This manual is also suitable for:

Km 463Km 461Km 464Km 465Km 466Km 468 ... Show all