MF DIGITAL OptiPrinter Quick Start Manual

Cd/dvd inkjet printer

Advertisement

Quick Links

1. Unpack

f
h
g
You should find the following packaged with your printer:
a OptiPrinter
b Power Cable
c USB Cable
Manual/Driver/
d
Test Image CD
Remove the tape securing the printer lid then open the lid and
remove the 2 pieces of protective tape on the CD Tray itself.

3. Inserting Ink Cartridges

CD Tray Button
Pins
TP 000 023 (1.03)
CD/DVD Inkjet Printer
a
e
b
d
c
e 2 Blank CDs
f Black & Color
Cartridge
g Discus Software
h Quick Start Guide
Press the CD Tray Button and the
tray will slide forward to receive a
blank CD. Place a CD onto the
tray, resting the disc against the
two pins at the front of the tray.
Press the CD Tray Button once
again and the tray slides back into
the printer.

2. Power Up

Power Cable
Attach the power cable to the back of the printer and plug into
the power supply.
Press the
Raise Cradle
Latch
Remove Plastic Tape
For Windows 2000 & XP only
USB Cable
Power On
button located on the front of the printer.
Open Printer Lid
Open the lid of the printer and the
cartridge cradle will slide to the center
(Note: the cradle will not slide to the
middle unless a CD has been loaded into
the CD tray as described previously).
Raise the 2 cradle latches. Remove the
plastic tape from the print cartridge and
push the cartridge firmly into the cradle.
Close the latch.
Finally, close the printer lid.
Guide
Power On
ZZ 004 805

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the OptiPrinter and is the answer not in the manual?

Questions and answers

Summary of Contents for MF DIGITAL OptiPrinter

  • Page 1 You should find the following packaged with your printer: Power Cable USB Cable Power On a OptiPrinter e 2 Blank CDs Attach the power cable to the back of the printer and plug into b Power Cable f Black & Color the power supply.
  • Page 2 Printer Settings. 5. Loading Discus/QuickTime Software The Discus software included with your OptiPrinter allows you to create stunning designs for your discs. Insert the Discus CD into your PC’s CD-ROM drive. Follow Standard Settings At the registration Window, click...
  • Page 3 (as shown in Fig. 3). Adjust the template on the Discus interface by using the X & Y nudge keys to move the template up, down, left, & right. Note: Every OptiPrinter is factory set for the correct position, however, CDs can vary in size and it may be necessary to make minor adjustments using the nudge feature.
  • Page 4 The screen below will appear. The test image should print out as per the CD image in Fig. A Place a blank CD into the OptiPrinter’s tray. It may be necessary to reboot your PC at some point during this Quick Start process.

Table of Contents