Error Messages - Triumph Adler CLP 4416 Instruction Handbook Manual

Error Messages

Message
Add paper MPTray
Call service
F###:
Call service
####:0123456
Cassette #
not loaded
Check waste
toner box
Clean printer
Press GO
Close duplexer
rear unit
Close duplexer
top cover
Close paper
transfer unit
Close
left cover
BASIC OPERATION GUIDE
The following table lists errors and maintenance messages that you can be
dealt with by yourself. If Call service appears, turn off the printer,
disconnect the power cord, and contact your service technician.
Some errors cause the alarm to sound. To stop the alarm, press
[CANCEL].
The paper has run out in the paper source displayed. Supply paper according to
the paper source displayed (paper cassettes, MP tray, optional paper feeders, or
optional envelope feeder).
This message is displayed alternately with messages indicating the printer status,
such as, Ready, Please wait, Processing, Waiting, and Form Feed Time
Out.
F### represents a controller error (#=0, 1, 2, ...). Call for service. The printer does
not operate when this message is displayed.
#### represents a mechanical error (#=0, 1, 2, ...). Call for service. The printer
does not operate when this message is displayed. The total number of pages
printed is also indicated, e.g. 0123456.
The corresponding paper cassette is not installed. Install the cassette. The
cassette number can be 1 (topmost) to 4 (bottom).
This message warns following two cases. Install the new waste toner box.
The waste toner box is not installed.
The waste toner box is full.
Please clean the inside of the printer. See Cleaning the Printer on page 4-8.
This message will be displayed when replacing the toner container after the
message Replace toner C, M, Y, K is displayed. After cleaning the inside of
the printer, press [GO] and the printer will be ready for printing.
The rear unit of the optional duplexer is open. Close the duplexer rear unit.
The top cover of the optional duplexer is open. Close the duplexer top cover.
The paper transfer unit is open. Close the paper transfer unit.
The left cover of the printer is open. Close the left cover.
Corrective Action
Troubleshooting
5-7