R7910A Or R7911 Diagnostics - Honeywell S7999B Product Data

S7999B, S7999C SOLA LOCAL OPERATOR INTERFACE
Fig. 89. Lead Lag Slave Status menu.
Lead Lag Master Status - Hydronic
Only
Table 56 shows the status page data for Lead Lag Master.
Table 56. Lead Lag Master.
Data
Master enabled Enabled
Status normal
Demand source Lead lag slave
Active Service None
Off setpoint 160 °F (71 °C)
Setpoint 150 °F (66 °C)
On setpoint 145 °F (63 °C)
operating 150 °F (66 °C)
temperature
Sensor state normal
Sensor temperature 150 °F (66 °C)
Slave firing no
Stager state idle
Stager timer
CH demand
CH frost demand no
DHW frost demand no
65-0303—05
Comment
44
Fig. 90. Lead Lag Master Status menu.
R7910A OR R7911
DIAGNOSTICS
The diagnostic page displays analog and digital I/O status of
the control. The digital I/O data is displayed as LEDs that are
either on (green) or off (red) (see Fig. 91–93). Not all digital I/O
can be displayed at the same time on the page, so a horizontal
scroll bar is used to move the view left and right to show all
digital I/O data.
Fig. 91. Diagnostic digital I/O page (left).