Input Selector - Yamaha A-S1000 Owner's Manual

TREBLE BALANCE
- + L
6 7

8 INPUT selector

Selects the input source you want to listen to.
The audio signals of the selected input source are also
output at the REC jacks.
y
• The input source names correspond to the names of the
connection jacks on the rear panel.
• Switch to the MAIN DIRECT position to select the component
connected to the MAIN IN jacks. When MAIN DIRECT is
selected as the input source, no signals are output at the PRE
OUT, REC, and PHONES jacks.
• The input setting is retained for about 1 week after the power is
turned off.
Note
The audio signals are not output at the REC jacks while LINE2 is
selected as the input source.
INPUT
CD
LINE 1 TUNER
LINE 2
MAIN DIRECT
R
AUDIO MUTE
8
VOLUME
PHONO
9 0
9 AUDIO MUTE
Press downward to reduce the current volume level by
approximately 20 dB. Press again to restore the audio
output to the previous volume level.
y
• The AUDIO MUTE indicator lights up while the mute function
is on.
• You can also rotate VOLUME on the front panel or press
VOL +/– on the remote control to resume the audio output.
0 VOLUME
Controls the volume level. This does not affect the REC
level.
Note
The VOLUME control does not affect when you select MAIN
DIRECT as the input source. Adjust the volume level using the
volume control on the preamplifier connected to the MAIN IN
jacks.
9
En