Download  Print this page

ACR Electronics GLOBALFIX iPRO RLB-36 Product Support Manual Page 13

406 mhz gps epirb beacon.
Hide thumbs


Category I beacons-Automatic deployment and activation
If the vessel sinks, the HydroFix™ HRU frees the beacon from the
bracket, allowing it to float to the surface. Built-in sensors detect that the
beacon is no longer in its bracket and when continuity is created by
water between two of the top cap screws, an activation circuit is
NOTE: Transmission of the 121.5 MHz and 406 MHz signals will not
occur until 100 seconds after activation.
HRU releases the rod
separating the front and
back cover of bracket at a
depth between 4-13 feet
Y1-03-0233 Rev. F
Ejector Spring
launches EPIRB
from the bracket
allowing it to float
freely to the water


Table of Contents

   Also See for ACR Electronics GLOBALFIX iPRO RLB-36

   Related Manuals for ACR Electronics GLOBALFIX iPRO RLB-36

Comments to this Manuals

Symbols: 0
Latest comments: