Mitsubishi Electric PAR-30MAA Installation Manual page 13

12. Service menu (Maintenance password is required.)
At the Main display, press the MENU button and select "Service" to make the maintenance settings.
When the Service menu is selected, a window will appear asking for the password.
To enter the current maintenance password (4 numerical digits), move the cursor to the digit you want to change with the F1 or F2 button,
and set each number (0 through 9) with the F3 or F4 button. Then, press the SELECT button.
Note: The initial maintenance password is "9999." Change the default password as necessary to
prevent unauthorized access. Have the password available for those who need it.
Note: If you forget your maintenance password, you can initialize the password to the default
password "9999" by pressing and holding the F1 and F2 buttons simultaneously for three
seconds on the maintenance password setting screen.
If the password matches, the Service menu will appear.
The type of menu that appears depends on the connected indoor units' type (City Multi or Mr. Slim).
<Mr. Slim>
Service menu
Test run
Input maintenance info.
Function setting
Check
Self check
Main menu:
Cursor
Note: Air conditioning units may need to be stopped to make
certain settings. There may be some settings that
cannot be made when the system is centrally
controlled.
(1) Test run (City Multi and Mr. Slim)
Select "Test run" from the Service menu to bring up the Test run menu.
· Test run: Select this option to perform a test run.
· Drain pump test run: Select this option to perform a test run on the drain pump on the indoor unit.
Applicable only to the type of indoor units that support the test run function.
Note: Refer to the indoor unit Installation Manual for the detailed information about test run.
(2) Input maintenance Info. (City Multi and Mr. Slim)
Select "Input maintenance Info." from the Service menu to bring up the Maintenance information
screen. Refer to the indoor unit Installation Manual for how to make the settings.
Note: The following settings can be made from the Maintenance Information screen.
•Registering model names and serial numbers
Enter the model names and serial numbers of outdoor and indoor units. The information
entered will appear on the Error information screen. Model names can have up to 18
characters, and the serial numbers can have up to 8 characters.
•Registering dealer information
Enter phone number of a dealer. The entered information will appear on the Error information
screen. Phone number can have up to 13 characters.
•Initializing maintenance information
Select the desired item to initialize the above settings.
(3) Function setting (Mr. Slim only)
Make the settings for the indoor unit
functions via the remote controller
as necessary.
Select "Function setting" from the
Service menu to bring up the
Function setting screen.
Service menu
Maintenance password
Remote controller check
Main menu:
Cursor
Function setting
Ref. address
Unit No. Grp./1/2/3/4/All
Monitor:
Cursor Address
<City Multi>
Service menu
Test run
Input maintenance info.
Lossnay
Check
Self check
Main menu:
Cursor
Service menu
Not available.
Please stop the unit.
Service menu:
[Button operation]
[1] Set the indoor unit refrigerant addresses and unit numbers with
the F1 through F4 buttons, and then press the SELECT button
to confirm the current setting.
[2] When data collection from the
indoor units is completed, the
current settings appears
highlighted. Non-highlighted items
indicate that no function settings
are made. Screen appearance
varies depending on the "Unit No."
setting.
– 13 –
Service menu
Enter maintenance password
Select:
Cursor
Service menu
Maintenance password
Remote controller check
Main menu:
Cursor
Service menu
Not available.
Centrally controlled.
Service menu:
Test run menu
Test run
Drain pump test run
Service menu:
Cursor
Maintenance information
Model name input
Serial No. input
Dealer information input
Initialize maintenance info.
Service menu:
Cursor
Function setting
Ref. address
Mode 1
Mode 2
Mode 3
Mode 4
Request:
Cursor
Common items
Grp.
Cursor