Table of Contents
Advertisement
Image adjustment (continued)
How to adjust the computer image
This projector automatically selects a proper signal format according to the type of video signal supplied from the
computer. However, video signals from the computer may not be projected correctly depending on the types of the
computer and images to be projected. In such a case, make adjustment according to the flowchart below.
When the size and position of
the computer image are not correct.
Project an image containing a lot of characters without black areas.
Note) Disable the screen saver if it is active.
Press the AUTO POSITION button.
Settings are automatically and optimally adjusted for the input
signal.
Image is projected
correctly.
YES
Adjustment is completed.
NO
Display the screen resolution setting menu of your computer.
(Example: In the case of Windows-based computer, right-click on the desktop, select Properties,
and click the Settings tab to display the screen resolution setting.)
resolution setting of your computer
is different from the setting of Resolution
(Memorize) in the Signal menu
Select Resolution (Memorize) in the Signal menu and press the ENTER button.
Set H. Pixels and V. Lines to the values of the screen resolution of your computer.
(Example: When the screen resolution of the computer is 1280x800, set H. Pixels to 1280 and
V. Lines to 800.)
Select Execute and press the ENTER button.
Automatic adjustment starts according to the selected resolution.
Image is projected
correctly.
YES
After the memory saving
message is displayed,
select your desired
memery number and press
the ENTER button.
Change the setting of Signal Detect in the Option menu.
Press the AUTO POSITION button.
Settings are automatically and optimally adjusted for the input
signal.
Image is projected
YES
The screen
of the projector.
YES
NO
Perform manual
adjustment.
After the memory saving
message is displayed,
select your desired memery
number and press the
ENTER button.
Adjust H. Position, V. Position, and Tracking in the Signal
menu. For details, see "Simple method to adjust the image
position." (See page 34.)
EN-33
NO
correctly.
NO
NO
When you don't save
YES
the adjustment result,
press the MENU button.
Adjustment is canceled.
Advertisement
Table of Contents
