MF DIGITAL Cougar 6600 Client Setup Manual
Hide thumbs
Also See for Cougar 6600 Client:
- Operator's manual (39 pages) ,
- Quick start manual (1 page)
Subscribe to Our Youtube Channel
Related Manuals for MF DIGITAL Cougar 6600 Client
Summary of Contents for MF DIGITAL Cougar 6600 Client
- Page 1 Setup Guide for the Cougar 6600 Client Page 1...
- Page 2 How to Configure the Cougar 6600 Client Configure the Cougar 6600 client feature to enable remote users. Connect the Cougar 6600 to your network using the RJ-45 connector. Turn on the Cougar 6600 Wait for the Cougar 6600 Standalone Series to boot up, you will see: Press the “7”...
- Page 3 Press the “START/YES” key, you will see: Press the “Stop No” key if the network does not use DHCP or press the “START/YES” key if the network does use DHCP. If you press the ““START/YES” “ key you will be prompted to Restart the system, if you press the “Stop No”...
- Page 4 Installing the CougarNET Client Application on A PC To Obtain optional CougarNet Client software visit www.mfdigital.com/techsupport.html Scroll to the “Downloads - Manuals, Guides, Drivers” download Select Cougar 6600 Optional Client from the latest software versions dropdown menu Then fill in the registration details and the following screen will appear: Click on “Download”...
- Page 5 Then click “Run” on the following screen: Then the following screen will appear: Then once all the files have extracted click “Next” on the following screen. Page 5...
- Page 6 Then click “Next” on the following screen: Then click “Next” on the following screen: Then click “Next” on the following screen: Page 6...
- Page 7 Then the following screen will appear: Then click “Finish” on the following screen and this will complete the installation: Once installed double click on the desktop shortcut to open the application: When the application opens the following screen will appear: Page 7...
- Page 8 Note: Keep in mind the SAVE and LOAD connections are saved per remote PC. If you want to save/load connections on multiple PC’s you will need to connect and save to each Press “Connect” to include a Cougar to the client Enter the name of the Cougar 6600 (MF106 ) press “OK”...
- Page 9 Using the CougarNET Client Application After you have connected all your Cougars, you will see the new tabs on top. One mouse click lets you select a Cougar. You can start a job, receive or send an image over the network to the selected Cougar.
- Page 10 Page 10...
Need help?
Do you have a question about the Cougar 6600 Client and is the answer not in the manual?
Questions and answers