Honda 2008 Odyssey Owner's Manual page 155

Recalling a Memorized Seat
Position
With Driver 1 With Driver 2
On Touring models only
Each remote transmitter activates
the driver's seat position memory
system (see page 184 ) and
customized vehicle control settings
(see page 101 ). When you open the
driver's door after unlocking it with
the remote transmitter, the driver's
seat and outside mirrors move to the
positions stored in memory. You will
hear two beeps when the movement
is completed.
The driving position memory
activation (Driver 1, Driver 2) is
shown on the back of each
transmitter. Make sure you store
your seat and outside mirror
positions in the memory that is
activated by the transmitter you
normally carry.
You can turn off this system
activation with the remote
transmitter. Press and hold the
LOCK and UNLOCK buttons at the
same time. The LED in the remote
transmitter will blink twice. Then
release the buttons, and press the
LOCK or UNLOCK button.
To turn the keyless memory settings
back on, repeat this procedure. The
LED will come on for 1 second to
indicate the feature has been turned
on.
Remote Transmitter
Remote Transmitter Care
Avoid dropping or throwing the
transmitter.
Protect the transmitter from
extreme temperature.
Do not immerse the transmitter in
any liquid.
If you lose a transmitter, the
replacement needs to be
reprogrammed by your dealer.
149