Table of Contents
Advertisement
I
llumination control
Display mode button
see page 11
(
)
Sunlight Sensor (Middle of
dash near the windshield).
(See Owner's manual for
location)
Dash illumination adjustment
knob (See Owner's manual for
location)
Headlights (On/Off)
Map Day/Night screen color
see page 103
choice (
for the
Day and Night color choices)
Recommended Display mode Day/Night settings:
• With the headlights on, select mid range for the dash illumination (see Owner's manual for location of knob).
• With the headlights off, select mid range for the dash illumination (see Owner's manual for location of knob).
• On the Setup "Color" adjustment screen, choose White for the map Day display, and black for the map Night display (see
page 103). Inappropriate adjustment of these colors can cause the Day/Night modes to appear inoperative.
Priority Operation
Allows selection of Day, Night or Off display
1
mode. This button has the highest priority and
overrides all other display control adjustments
listed below.
2
If the sunlight sensor detects daylight and the
headlights are turned on, the navi automatically
overrides (cancels) the Night display and
displays the Day display mode once the vehicle
begins to move.
3
When headlights are turned on, and you wish to
have the Day display mode, then adjust the
illumination to the full bright setting (beeps).
4
When turned on, it changes the display to the
Night display mode. The previous three
controls listed above can "cancel" this function.
N/A
The user can select the color of the screen that
will be displayed for the Day, and Night
display modes described above.
System Set-up
Override conditions
When the car is restarted, the display mode
previously selected by this button is canceled,
and the display mode is determined by one of
the controls below.
If desired, use the Display mode button
to override this automatic choice.
When the headlights are turned ON, adjust the
dash brightness down (counterclockwise) from
the maximum brightness position.
Use the Display mode button
adjust the dash illumination to full bright to set
the display to your desired choice.
For best contrast, ensure that the Map "color"
is white for Day, and black for Night.
Navigation System 105
, or
Advertisement
Table of Contents
