Page 1
Instructions Jeep ’ ® Push’n Scoot ™ Model Number: 72607 If you experience a problem with this product, or are missing a part, please call us at 1-800-432-KIDS, rather than return this product to the store. Please save these instructions for future reference. Adult assembly is required.
Page 2
• Adult supervision is required. • Never use near steps, sloped driveways, hills, roadways, alleys, swimming pool areas or other bodies of water. • Always wear shoes or sneakers. • Never allow more than one rider. • If you experience a problem with this product, or are missing a part, please call us at 1-800-432-KIDS, rather than return this product to the store.
Page 3
CAUTION Please keep small parts and plastic bags out of children’s reach. Dispose of plastic bags properly. Rear Axle Scrap Block of Wood • Place a cap nut on a scrap block of wood. • Fit the rear axle into the cap nut and tap with a hammer until secure.
Page 4
Cap Nut Cap Nut Tool Rear Axle Spoke Side Up Wheel • Slide a wheel, spoke side up, onto the end of the rear axle. • Fit a cap nut onto the end of the rear axle. • Fit a cap nut tool over the cap nut and tap the center with a hammer until the cap nut is secure.
Page 5
Cap Nut Tool Cap Nut Bushing "A" Front Axle • Lower the vehicle body. • Fit a bushing, narrow side down, onto the exposed end of the "A" front axle and into the hole in the vehicle body. • Fit a cap nut onto the end of the "A" front axle. •...
In Canada, call 1-800-567-7724, or write to: Mattel/Fisher-Price, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2. In Great Britain, telephone 01734 770488. In Australia, call the Fisher-Price Australian Consumer Advisory Service toll-free at 1-800-800-812, or write to: Fisher-Price, Mattel Pty. Limited, 461 Plummer Street, Port Melbourne, Victoria 3207.