Korg micro arranger Quick Start Manual page 7

Professional arranger
Table of Contents

Advertisement

8
MEMORY (TIE)
This button turns the Lower and Chord Memory functions on
or off. Go to the "Page 24 ‐ Preferences: controls" edit page to
decide  if  this  button  should  be  a  Chord  Memory  only,  or  a
Lower/Chord  Memory  button.  When  it  works  as  a  Lower/
Chord Memory:
O N
The sound to the left of the split point, and the
chord  for  the  automatic  accompaniment,  are
kept  in  memory  even  when  you  raise  your
hand from the keyboard.
OFF
The sound and chords are released as soon as
you raise your hand from the keyboard.
 This button doubles as a TIE function for the Song mode.
9
BASS INV. (REST)
This button turns the Bass Inversion function on or off.
ON
The  lowest  note  of  a  chord  played  in  inverted
form will always be detected as the root note of
the chord. Thus, you can specify to the arranger
composite chords such as Am7/G or "F/C".
OFF
The  lowest  note  is  scanned  together  with  the
other  chord  notes,  and  is  not  always  consid‐
ered as the root note.
 This button doubles as a REST function for the Song mode.
10 MAN. BASS
This button turns the Manual Bass function on or off.
Note: When you press the MAN. BASS button, the Bass track vol‐
ume  is  automatically  set  to  the  maximum  value.  The  volume  is
automatically set back to the original value when the MAN. BASS
button is deactivated.
ON
The  automatic  accompaniment  stops  playing
(apart  for  the  Drum  and  Percussion  tracks),
and  you  can  manually  play  the  Bass  track  on
the  Lower part  of  the  keyboard.  You can  start
the  automatic accompaniment  again by  press‐
ing one of the CHORD SCANNING buttons.
OFF
The  bass  track  is  automatically  played  by  the
Style.
11 SPLIT POINT (<)
Keep  this  button  pressed  to  open  the  Split  Point  window.
While this window is open, you can set the split point simply
by playing the split point note on the keyboard. Then, release
the SPLIT POINT button.
To memorize the selected split point note, press the GLOBAL but‐
ton, then press WRITE to save the Global settings into memory.
 This button doubles as a PREVIOUS EVENT function for
the Backing Sequence and Song modes .
12 G.QUANTIZE (>)
Press  this  button  to  open  the  Groove  Quantize  window,
where  you  can  select  a  realtime  groove  quantization  to  be
applied to the Song (only Sequencer 1).
  This  button  doubles  as  a  NEXT  EVENT  function  for  the
Backing Sequence and Song modes.
13 TEMPO
(= LOCK)
This button turns the Tempo Lock function on or off.
ON
When  you  select  a  different  Style  or  Perfor‐
mance,  the  tempo  doesn't  change.  You  can  still
change it using the DIAL or the TEMPO buttons.
OFF
When  you  select  a  different  Style  or  Perfor‐
mance,  the  memorized  tempo  value  is  auto‐
matically selected.
14
SINGLE TOUCH
This button turns the Single Touch function on or off.
ON
When  a  different  Style  (or  the  same  again)  is
selected, a Single Touch Setting (STS1) is auto‐
matically  selected,  meaning  that  the  Realtime
tracks  and  effects  will  change,  together  with
the Style tracks and effects.
OFF
When you select a different Style (or the same
again), the Style tracks and effects are changed,
while the Realtime tracks are not changed.
15 STYLE section (NUMERIC KEYPAD)
Use these buttons to open the Style Select window and select
a Style. See "Selecting a Style" on page 14.
The leftmost button lets you select the upper or lower row of
Style banks. Press it until you've selected the row you're look‐
ing  for.  (After  both  LEDs  have  turned  on,  press  the  button
again to turn them off).
UPPER LED ON
Upper‐row Styles selected.
LOWER LED ON
Lower‐row Styles selected.
A  word  about  Style  banks  and  names.  Styles  from  "8/16
BEAT" to "WORLD 3", and from "LATIN1" to "TRAD" are
standard  Styles,  the  user  can't  normally  overwrite  with  a
Load operation.
"DIRECT  SD"  Styles  are  Styles  directly  accessed  from  the
memory card (no need to load from card).
Styles  from  "USER1"  to  "USER3"  are  locations  where  you
can load new Styles from the memory card.
Each button (Style bank) contains 2 pages, each with up to 8
Styles. Browse through the Styles using the PAGE buttons.
There is a shortcut to see the original bank for a Style. You
can see the original bank where a Style is contained. Just keep
the SHIFT button pressed, and then press the lefmost button of
the  STYLE  section.  A  message  window  will  appear,  showing
the name of the original bank. Release the SHIFT button to exit
the window.
There is a shortcut to see all pages of the selected bank. To
cycle  all  pages  for  a  selected  bank,  press  the  bank's  button
until you see the page that you're looking for.
 These buttons double as a numeric keypad on certain pages.
16 FADE IN/OUT
When  the  Style  stopped,  press  this  button  to  start  it  with  a
volume fade‐in (the volume goes from zero to the maximum).
When the Style is playing, press this button to stop it with a
volume fade‐out (the volume gradually decreases).
You don't need to press START/STOP to start or stop the Style.
17 VARIATION 1–4 (NOTE LENGTH) buttons
Each of these buttons will select one of the four variations of
the  current  Style.  Each  variation  can  vary  in  patterns  and
sounds.
 These buttons double as a NOTE LENGTH function for the
Song mode.
18 FILL 1–2 (NOTE LENGTH) buttons
These two buttons trigger a fill‐in. Press them twice (LED blink‐
ing) to let them play in loop, and select any other Style element
(Fill, Intro, Variation...) to exit the loop.
  They  also  double  as  a  NOTE  LENGTH  function  for  the
Song mode.
Front panel
4
The music stand

Advertisement

Table of Contents
loading

This manual is also suitable for:

Microarranger

Table of Contents