Front panel (AMP/LFO/EG)
AMP LEVEL knob
This adjusts the volume of the timbre.
This turns the vocoder on/oﬀ.
This turns the vocoder function
on/oﬀ. By pressing this bu on while
holding down the SHIFT/EXIT
bu on, you can turn Mic Thru on/oﬀ.
This turns the timbre's Voice Unison
By pressing this bu on while holding
down the SHIFT/EXIT bu on, you can
jump to the unison voice se ing screen.
LFO select button
This bu on selects the LFO that will be edited by the LFO
controls. The LED of the currently selected LFO will light
up. The LED will blink in time with the LFO frequency.
Use these to edit the LFO parameters.
This knob adjusts the frequency of the LFO.
This knob adjusts the depth to which the LFO will aﬀect
the ﬁlter or pitch.
EG select button
This selects the EG that will be
edited by the EG controls. The
LED of the currently selected
EG will light up.
The LED will blink in
synchronization with the EG's eﬀect.
This turns on/oﬀ velocity sensitivity
for the EG, which allows the EG
se ings to vary according to the
amount of force you use when
playing the keyboard.
Panel description and functions
These adjust the EG parameters.
This adjusts the time from note-on (the
moment you play a key) until the a ack
level (the maximum value of the envelope)
This adjusts the time from when the a ack
level is reached until the sustain level is
This adjusts the level where the volume
will be held a er the decay time has elapsed.
This adjusts the amount of time from
note-oﬀ (the moment you release the key)
until the volume has completely decayed